DataSheet.es    


PDF AT-104 Data sheet ( Hoja de datos )

Número de pieza AT-104
Descripción Fixed Attenuators (SMA Type)
Fabricantes Hirose Electric 
Logotipo Hirose Electric Logotipo



Hay una vista previa y un enlace de descarga de AT-104 (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! AT-104 Hoja de datos, Descripción, Manual

Fixed Attenuators (SMA Type)
AT-100, AT-200, and AT-300 Series
sFeatures
1.Abundant Variations of Attenuators
Attenuation amounts are available in abundant
variations from 0 to 4 dB in 0.5 dB steps, from 4 to
10 dB in 1 dB steps, and in 12, 13, 15, 20, 26 and
30 dB so that levels can be finely adjusted.
AT-103
AT-206
AT-310
2.SMA Type
The coupling portions are available in all types of
plug and jack combinations and stainless steel is
used for the external cladding to form a small and
durable structure.
3.High Degree of Matching and High Reliability
The design of the attenuation element uses a
distributed constant circuit and metal film resistor. A
high degree of matching is achieved as indicated in
the VSWR of the appended tables. Furthermore,
these attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
sProduct Specifications
Ratings
Rated frequency range (Note)
Characteristic impedance
Maximum Input Power
DC to 18.0 GHz
50 ohms
1W
Note: The frequency range will differ depending on the model.
Item
Standard
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part
Connector Body
Insulator
Male contacts
Female contacts
Attenuation element
Material
Stainless steel
PTFE
Beryllium copper
Beryllium copper
Metal film
Finish
Passivated
----------
Gold plating
Gold plating
----------
sOrdering Information
AT - 1 00-(0)
1 23
1 AT: Indicates a fixed attenuator
2 Indicates the Series Name (Coupling Portion)
1: SMA plug - jack
2: SMA plug - plug
3: SMA jack - jack
3 Attenuation
01 : 1dB
06 : 6dB
00-(0) : 0dB
(Through)
00-(0.5) : 0.5dB
00-(3.5) : 3.5dB
78

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet AT-104.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AT-100Fixed Attenuators (SMA Type)Hirose Electric
Hirose Electric
AT-1000High Power Fixed Attenuators (Radiator built-in)Hirose Electric
Hirose Electric
AT-1001High Power Fixed Attenuators (Radiator built-in)Hirose Electric
Hirose Electric
AT-1002High Power Fixed Attenuators (Radiator built-in)Hirose Electric
Hirose Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar