|
|
Número de pieza | A1751A | |
Descripción | A1751A DWDM Analog Forward-Path or Return-Path Laser Modules | |
Fabricantes | Agere Systems | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de A1751A (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! Data Sheet, Rev. 4
June 2001
A1751A DWDM Analog
Forward-Path or Return-Path Laser Modules
Features
s Higher temperature rating
s Excellent linearity
s Standard ITU wavelengths
s Advanced analog chip design
s Tested for forward and return path applications
s Reduces equipment requirements in the hub
s Exceeds Telcordia Technologies* 468 specifica-
tion.
Applications
s Node capability
s Narrow transmitter housing
s Networks with limited fiber
s Architectures using separate optical wavelengths
to carry targeted services
Description
The A1751A laser module is a dense wavelength-
division multiplexing (DWDM) laser for analog appli-
cations. It features a distributed-feedback (DFB) chip
that has been designed specifically for radio fre-
quency (RF) applications. The A1751A laser module
has a wide temperature range for reliable perfor-
mance in harsh node environments and narrow
transmitter designs. It also features low adiabatic
chirp to maximize signal quality in short and long
lengths of fiber. The laser’s excellent inherent linear-
ity minimizes degradation of the broadcast signals
caused by the quadrature amplitude modulation
(QAM) channels.
Wavelength-division multiplexing is being designed
into cable television architectures. DWDM, a method
for delivering targeted QAM signals to different loca-
tions, allows multiple signal sets to be combined onto
a single strand of fiber for transmission from a head-
end to a hub. At the hub, individual QAM signals can
be selected and combined with broadcast analog
channels. The versatile A1751A DWDM laser module
reduces cable network architecture fiber needs and
lessens equipment requirements in the hub.
The A1751A is available in a wide range of standard
ITU wavelengths. The lasers are offered as either for-
ward-path (40 MHz—860 MHz) or return-path
(5 MHz—210 MHz) modules.
* Telcordia Technologies is a trademark of Telcordia Technologies,
Inc.
1 page Data Sheet, Rev. 4
June 2001
A1751A DWDM Analog
Forward-Path or Return-Path Laser Modules
Electrical Schematics (continued)
CONSTANT
TEC
ALARM
1
THERMISTOR
2
THERMISTOR
dc LASER 3
BIAS
MPD ANODE 4
CASE GROUND
5
MPC CATHODE
6
TEC (+)
7
TEC (–)
39 nH
200 Ω
0.01 µf
3.3 µH
1000 pf
0.01 µf
0.01 µf
1000 pf
J2
1 THERMISTOR
2 THERMISTOR
3 dc LASER BIAS
4 MPD ANODE (CASE GROUND)
5 MPC CATHODE
6 TEC (+)
7 TEC (–)
8 GND
9 GND
10 GND
1-1238F.c
Note: When ordering the dc set, the following boards are included: alarm board, 9108-004; TEC board, 9028-004; constant current, 9383-004.
Figure 4. dc Set (Agere Systems-Supplied Option)
Agere Systems Inc.
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet A1751A.PDF ] |
Número de pieza | Descripción | Fabricantes |
A1751A | A1751A DWDM Analog Forward-Path or Return-Path Laser Modules | Agere Systems |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |