|
|
PDF 15KP Data sheet ( Hoja de datos )
| Número de pieza | 15KP | |
| Descripción | GLASS PASSIVATED JUNCTION TRANSIENT (VOLTAGE SUPPRESSOR VOLTAGE- 17 to 220 Volts 15000 Watt Peak Pulse Power) | |
| Fabricantes | Pan Jit International Inc. | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 15KP (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
DATA SHEET
15KP SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE- 17 to 220 Volts 15000 Watt Peak Pulse Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• Glass passivated chip junction in P-600 package
• 15000W Peak Pulse Power capability on 10/1000µs waveform
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• High temperature soldering guaranteed: 300°C/10 seconds/.375",(9.5mm) lead
length/5lbs., (2.3kg) tension
P-600
MECHANICALDATA
Case: JEDEC P-600 Molded plastic
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes positive end (cathode )
Mounting Position: Any
Weight: 0.07 ounce, 2.1 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
Peak Pulse Power Dissipation on 10/1000µs waveform ( Note 1,FIG. 1)
Peak Pulse Current on 10/1000µs waveform ( Note 1,FIG. 3)
Steady State Power Dissipation at TL=50°CLead Lengths .375",(9.5mm)
(Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed
on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range
SYMBOL
PPPM
IPPM
P
M (AV)
I
FSM
T,T
J STG
VALUE
Minimum 15000
SEE TABLE 1
10
400
-55 to +175
Unit: inch ( mm )
.052(1.3)
.048(1.2)
.360(9.1)
.340(8.6)
UNITS
Watts
Amps
Watts
Amps
°C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig.
2.Mounted on Copper Leaf area of 0.79 in2(20mm2).
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
DATE : 02/08/31
PAGE . 1
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet 15KP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 15KCD10 | Transient suppressor CELLULAR DIE PACKAGE |  Microsemi Corporation |
| 15KCD100 | Transient suppressor CELLULAR DIE PACKAGE | Microsemi Corporation |
| 15KCD100A | Transient suppressor CELLULAR DIE PACKAGE | Microsemi Corporation |
| 15KCD11 | Transient suppressor CELLULAR DIE PACKAGE | Microsemi Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |