|
|
Número de pieza | AG101 | |
Descripción | High Dynamic Range Gain Block | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AG101 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! AG101
High Dynamic Range Gain Block
The Communications Edge™
Advanced Product Information
Product Features
• 60 - 3000 MHz
• +32 dBm Output IP3
• 2.4 dB Noise Figure
• 14 dB Gain
• +15 dBm P1dB
• MTBF >1000 Years
• SOT-89 SMT Package
• Single Bias Supply
(+3.3 V or +4.5 V)
Product Description
Functional Diagram
The AG101 is a general purpose gain block that
offers good dynamic range in a low cost surface
mount package. The combination of flat OIP3
and noise figure performance over frequency
makes it attractive for for both narrow band
and broadband applications. Superior thermal
design allows the product to achieve +32 dBm
OIP3 performance at a mounting temperature
of +85°C with an associated MTBF of >1000
years3. All devices are 100% RF and DC tested.
4
123
Function
Input
Ground
Output/Bias
Ground
Pin No.
1
2
3
4
Actual Size
Specifications
Parameter
Units Min. Typical Max.
Frequency Range
MHz
60-3000
S21 - Gain
dB 13.0 14.0 16.0
S11 - Input Return Loss dB
-9.0
S22 - Output Return Loss dB
-15.0
Output IP3
dBm +28 +32 +36
Output P1dB
dBm +15
Noise Figure
dB 2.4
Operating Current Range mA 40
50 75
Supply Voltage V 4.5
Test conditions unless otherwise noted.
1. T = 25°C, Vdd = 4.5 V, Frequency = 800 MHz, 50 ohm system.
2. 3OIP measured with two tones at an output power of 2 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 slope rule.
3. MTBF calculated with ground lead temperature at 85°C.
4. S11 can be improved using an optional matching network.
Recommended Maximum Ratings
Parameter
Rating
Operating Case Temperature
Storage Temperature
DC Voltage
RF Input Power (continuous)
-40 to +85°C
-55 to +125°C
+5.5 V
+4 dBm
Operation of this device above any of these parameters may cause permanent damage.
Typical Parameters
Parameter
Units
Typical
Frequency
S21
S11
S22
Output IP3
Output P1dB
Noise Figure
MHz
dB
dB
dB
dBm
dBm
dB
900
13.4
-12.5
-21.2
+32.5
+15.1
2.4
1900
12.2
-13.2
-17.8
+33.1
+15.0
2.6
Typical parameters reflect performance in an applicaton circuit.
Ordering Information
Part No.
AG101
AG101-PCB
Description
GaAs MMIC Amplifier
(Available in tape and reel)
Fully Assembled Application Circuit
WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: [email protected] • Web site: www.wj.com
April 2002
1 page AG101
Application Circuit: 60 - 100 MHz
Typical Specifications
Frequency
Magnitude S21
Magnitude S11
Magnitude S22
Noise Figure
Bias Supply
70 MHz
16.3 dB
-17.1 dB
-15.6 dB
5.1 dB
4.5 V @ 50 mA
Schematic
VDD = + 4.5 V
ID = 75 mA
RF IN
C1
.018 µF
L1
180 nH
C2
5.6 pF
L2
180 nH
C3
.018 µF
PIN 1
AG101
PIN 3
PIN 2,4
RF OUT
C4
.018 µF
S-Parameters
20
15
10 S21
5
0 S11
-5
-10
S22
-15
-20
30 50 70 90 110 130 150
Frequency (MHz)
Noise Figure
8
7
6
5
4
3
30 50 70 90 110 130 150
Frequency (MHz)
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: [email protected] • Web site: www.wj.com April 2002
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet AG101.PDF ] |
Número de pieza | Descripción | Fabricantes |
AG100 | Diode (spec sheet) | American Microsemiconductor |
AG101 | High Dynamic Range Gain Block | ETC |
AG101 | GaAs MMIC Gain Block | TriQuint Semiconductor |
AG101-PCB | High Dynamic Range Gain Block | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |