DataSheet.es    


PDF BT134-600E Data sheet ( Hoja de datos )

Número de pieza BT134-600E
Descripción 4Q Triac
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de BT134-600E (archivo pdf) en la parte inferior de esta página.


Total 13 Páginas

No Preview Available ! BT134-600E Hoja de datos, Descripción, Manual

BT134-600E
4Q Triac
21 November 2013
Product data sheet
1. General description
Planar passivated sensitive gate four quadrant triac in a SOT82 plastic package intended
for use in general purpose bidirectional switching and phase control applications. This
"series E" sensitive gate triac is intended to be interfaced directly to microcontrollers,
logic integrated circuits and other low power gate trigger circuits.
2. Features and benefits
Compact package
Direct interfacing to logic level ICs
Direct interfacing to low power gate drive circuits
High blocking voltage capability
Low holding current for low current loads and lowest EMI at commutation
Planar passivated for voltage ruggedness and reliability
Sensitive gate
Triggering in all four quadrants
3. Applications
General purpose low power motor control
Home appliances
Industrial process control
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
VDRM
repetitive peak off-
state voltage
ITSM non-repetitive peak on- full sine wave; Tj(init) = 25 °C;
state current
tp = 20 ms; Fig. 4; Fig. 5
IT(RMS)
RMS on-state current full sine wave; Tmb ≤ 107 °C; Fig. 1;
Fig. 2; Fig. 3
Static characteristics
IGT
gate trigger current
VD = 12 V; IT = 0.1 A; T2+ G+;
Tj = 25 °C; Fig. 7
Min Typ Max Unit
- - 600 V
- - 25 A
- - 4A
-
2.5 10
mA
Scan or click this QR code to view the latest information for this product

1 page




BT134-600E pdf
NXP Semiconductors
BT134-600E
4Q Triac
30
ITSM
(A)
25
0 0 3 aae8 3 1
20
15
10 IT ITSM
t
5
1/ f
Tj(init)= 25 °C m ax
0
1 10 102 103 104
number of cycles
f = 50 Hz
Fig. 4. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum
values
103 003aae829
IT ITSM
ITSM
(A)
102
t
tp
Tj(init)= 25 °C m ax
(1 )
(2 )
10
10-5
10-4
10-3
10-2
tp (s)
tp ≤ 20 ms
(1) dIT/dt limit
(2) T2- G+ quadrant limit
Fig. 5. Non-repetitive peak on-state current as a function of pulse width; maximum values
10-1
BT134-600E
Product data sheet
All information provided in this document is subject to legal disclaimers.
21 November 2013
© NXP N.V. 2013. All rights reserved
5 / 13

5 Page





BT134-600E arduino
NXP Semiconductors
BT134-600E
4Q Triac
11. Legal information
11.1 Data sheet status
Document
status [1][2]
Objective
[short] data
sheet
Preliminary
[short] data
sheet
Product
[short] data
sheet
Product
status [3]
Definition
Development This document contains data from
the objective specification for product
development.
Qualification This document contains data from the
preliminary specification.
Production
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.nxp.com.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
11.2 Definitions
Preview — The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
NXP Semiconductors does not give any representations or warranties as to
the accuracy or completeness of information included herein and shall have
no liability for the consequences of use of such information.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local NXP
Semiconductors sales office. In case of any inconsistency or conflict with the
short data sheet, the full data sheet shall prevail.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their
applications and products using NXP Semiconductors products, and NXP
Semiconductors accepts no liability for any assistance with applications or
customer product design. It is customer’s sole responsibility to determine
whether the NXP Semiconductors product is suitable and fit for the
customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default
in the customer’s applications or products, or the application or use by
customer’s third party customer(s). Customer is responsible for doing all
necessary testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications
and the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product
is deemed to offer functions and qualities beyond those described in the
Product data sheet.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
11.3 Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, NXP Semiconductors does not give
any representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
BT134-600E
Product data sheet
All information provided in this document is subject to legal disclaimers.
21 November 2013
© NXP N.V. 2013. All rights reserved
11 / 13

11 Page







PáginasTotal 13 Páginas
PDF Descargar[ Datasheet BT134-600E.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BT134-6004Q TriacNXP Semiconductors
NXP Semiconductors
BT134-600TRIACSemiHow
SemiHow
BT134-600TriacBLUE ROCKET ELECTRONICS
BLUE ROCKET ELECTRONICS
BT134-600BTriacsInchange Semiconductor
Inchange Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar