DataSheet.es    

PDF Z00607MA Datasheet ( Hoja de datos )

Número de pieza Z00607MA
Descripción Triac logic level
Fabricantes NXP 
Logotipo NXP Logotipo

Total 12 Páginas
		
Z00607MA Hoja de datos, Descripción, Manual
Z00607MA
Triac logic level
Rev. 01 — 26 February 2008
Product data sheet
1. Product profile
1.1 General description
Passivated sensitive gate triac in a SOT54 plastic package
1.2 Features
I Sensitive gate
I Direct interfacing to logic level ICs
I Gate triggering in four quadrants
I Direct interfacing to low power gate drive
circuits
1.3 Applications
I General purpose switching and phase I Low power AC fan speed controllers
control
1.4 Quick reference data
I VDRM 600 V
I IGT 5 mA
I IGT 7 mA (T2G+)
I IT(RMS) 0.8 A
I ITSM 9 A (t = 20 ms)
2. Pinning information
Table 1.
Pin
1
2
3
Pinning
Description
main terminal 2 (T2)
gate (G)
main terminal 1 (T1)
Simplified outline
Graphic symbol
T2
sym051
T1
G
321
SOT54 (TO-92)

1 page

Z00607MA pdf
NXP Semiconductors
5. Thermal characteristics
Table 4.
Symbol
Rth(j-lead)
Rth(j-a)
Thermal characteristics
Parameter
Conditions
thermal resistance from junction to full cycle; see Figure 6
lead
thermal resistance from junction to full cycle; printed circuit
ambient
board mounted; lead
length = 4 mm
Z00607MA
Triac logic level
Min Typ Max Unit
- - 60 K/W
- 150 - K/W
102
Zth(j-lead)
(K/W)
10
003aac206
1
101
P
102
105
104
103
102
101
tp t
1 tp (s)
10
Fig 6. Transient thermal impedance from junction to lead as a function of pulse width
Z00607MA_1
Product data sheet
Rev. 01 — 26 February 2008
© NXP B.V. 2008. All rights reserved.
5 of 12

5 Page

Z00607MA arduino
NXP Semiconductors
Z00607MA
Triac logic level
10. Legal information
10.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
10.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
11. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Z00607MA_1
Product data sheet
Rev. 01 — 26 February 2008
© NXP B.V. 2008. All rights reserved.
11 of 12

11 Page


PáginasTotal 12 Páginas
PDF Descargar[ Z00607MA.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
Z00607MAStandard 0.8 A TriacsSTMicroelectronics
STMicroelectronics
Z00607MATriacBLUE ROCKET ELECTRONICS
BLUE ROCKET ELECTRONICS
Z00607MATriac logic levelNXP
NXP
Z00607MASensitive Gate TriacsHAOPIN
HAOPIN

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar