DataSheet.es    


PDF N588H200 Data sheet ( Hoja de datos )

Número de pieza N588H200
Descripción Advanced 3-ch Voice/Melody IC
Fabricantes nuvoton 
Logotipo nuvoton Logotipo



Hay una vista previa y un enlace de descarga de N588H200 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! N588H200 Hoja de datos, Descripción, Manual

N588Hxxx
N588Hxxx
Data Sheet
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of PowerSpeech® based system design. Nuvoton
assumes no responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
www.nuvoton.com
Release Date: Jun. 2016
- 1 - Version A15.0

1 page




N588H200 pdf
N588Hxxx
3. Pin Description
Pin Name
/RESET
BP00 ~ BP07
BP10 ~ BP17
I/O Function
I IC reset input, low active.
General input/output pins.
Each pin can be set as Input or Output individually.
When the pin will be set output by BP0D, user needs to set
BP0x value of 0/1 first.
For output pin, BP0 provides high-sink current.
I/O For input pin, it can be set as pull-high or floating
BP00/02/04 can be set as 3-pin H/W PWM output with 64-
level resolution. They can be paired with BP01/03/05 (also
H/W PWM output) respectively with same or opposite phase
of output waveform
BP07 can be configured as IR carrier output
General input/output pins.
Each pin can be set as Input or Output individually.
When the pin will be set output by BP1D, user needs to set
I/O
BP1x value of 0/1 first.
For input pin, it can be set as pull-high or floating.
BP1 can generate interrupt request to release IC from STOP
mode
General input/output pins.
Each pin can be set as Input or Output by group, BP20 ~ BP23
*BP20 ~ BP27
I/O
configured by BP2D[0], and BP24 ~ BP27 by BP2D[1].
When the pin will be set output by BP2D, user needs to set
BP2x value of 0/1 first.
PWM+
O PWM driver positive output to drive speaker directly
PWM-
O PWM driver negative output to drive speaker directly
VDD
Power Positive power supply for uP and peripherals
VSS Power Negative power supply for oscillation, uP and peripherals
VDD_IO Power Positive power supply for I/O
VSS_IO Power Negative power supply for I/O
VDD_SPK Power Positive power supply for speaker driver
VSS_SPK Power Negative power supply for speaker driver
Note: BP20 ~ BP27 only provides in N588H200/201, N588H250/251, N588H340/341, N588H480 and
N588H650
Release Date: Jun. 2016
- 5 - Version A15.0

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet N588H200.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
N588H200Advanced 3-ch Voice/Melody ICnuvoton
nuvoton
N588H201Advanced 3-ch Voice/Melody ICnuvoton
nuvoton

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar