DataSheet.es    


PDF 2N4441 Data sheet ( Hoja de datos )

Número de pieza 2N4441
Descripción SILICON CONTROLLED RECTIFIERS
Fabricantes Digitron Semiconductors 
Logotipo Digitron Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de 2N4441 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! 2N4441 Hoja de datos, Descripción, Manual

2N4441-2N4444
High-reliability discrete products
and engineering services since 1977
SILICON CONTROLLED RECTIFIERS
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak repetitive forward and reverse blocking voltage(1)
2N4441
2N4442
2N4443
2N4444
VRRM, VDRM
50
200 Volts
400
600
Non repetitive peak reverse blocking voltage
(t = 5ms (max.) duration)
2N4441
2N4442
2N4443
2N4444
VRSM
75
300
Volts
500
700
Forward current RMS (all conduction angles)
IT(RMS)
8 Amps
Average on state current, TC = 73°C
IT(AV) 5.1 Amps
Peak non-repetitive surge current
(1/2 cycle, 60Hz preceded and followed by rated current and voltage)
ITSM
80 Amps
Circuit fusing considerations, TJ = -40 to +100°C; t = 8.3ms
I2t 25 A2s
Forward peak gate power
PGM 5 Watts
Average gate power
PG(AV)
0.5 Watts
Forward peak gate current
IGM 2 Amps
Peak reverse gate voltage
Operating junction temperature range
VRGM
TJ
10
-40 to +100
Volts
°C
Storage temperature range
Tstg
-40 to +150
°C
Mounting torque (6-32 screw)(2)
- 8 In. lb.
Note 1: Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with
a constant current source such that the voltage ratings of the devices are exceeded.
Note 2: Torque rating applies with use of torque washer. Mounting torque in excess of 8 in. lbs. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are
common. Soldering temperatures shall not exceed 225°C.
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction to case
Thermal resistance, junction to ambient
Symbol
RӨJC
RӨJA
Typical
-
40
Maximum
2.5
-
Unit
°C/W
°C/W
Rev. 20130117

1 page




2N4441 pdf
High-reliability discrete products
and engineering services since 1977
2N4441-2N4444
SILICON CONTROLLED RECTIFIERS
Rev. 20130117

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet 2N4441.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
2N4440RF & MICROWAVE TRANSISTORS WIDEBAND VHF-UHF CLASS CMicrosemi Corporation
Microsemi Corporation
2N4440Trans GP BJT NPN 40V 1.5A 3-Pin TO-60New Jersey Semiconductor
New Jersey Semiconductor
2N4441SILICON CONTROLLED RECTIFIERSMotorola  Inc
Motorola Inc
2N4441SILICON CONTROLLED RECTIFIERSDigitron Semiconductors
Digitron Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar