|
|
Número de pieza | P6SMBJ200-AU | |
Descripción | TVS Diode, SMD (Transient Voltage Suppressor) | |
Fabricantes | Pan Jit International | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de P6SMBJ200-AU (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! P6SMBJ-AU SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watts
STAND-OFF VOLTAGE
5 to 220 Volts
Recongnized File # E210467
FEATURES
• For surface mounted applications in order to optimize board space.
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• Acqire quality system certificate : TS16949
• AEC-Q101 qualified
• Lead free in comply with EU RoHS 2011/65/EU directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
• Case: JEDEC DO-214AA,Molded plastic over passivated junction.
• Terminals: Solder plated,solderable per MIL-STD-750,Method 2026
• Polarity: Color band denotes cathode end
• Standard Packaging: 12mm tape (EIA-481)
• Weight: 0.003 ounce, 0.093 gram
0.050(1.27)
0.030(0.76)
0.185(4.70)
0.160(4.06)
0.220(5.59)
0.200(5.08)
0.012(0.305)
0.006(0.152)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types P6SMBJ5.0 thru types P6SMBJ220.
Electrical characteristics apply in both directions.
MAXIMUM RATINGSAND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
Rating
Peak Pulse Power Dissipation on 10/1000μs waveform (Notes 1,2, Fig.1)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) (Notes 2,3)
Peak Pulse Current on 10/1000μs waveform (Notes 1) Fig.3
Typical Thermal Resistance Junction to Air (Notes 2)
Operating Junction and Storage Temperature Range
Symbol
PPP
IFSM
IPPM
RθJA
TJ,TSTG
Value
600
100
see Table 1
60
-55 to +150
Units
Watts
Amps
Amps
OC / W
OC
NOTES :
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25OC per Fig. 2.
2. Mounted on 5mm2 (0.13mm thick) land areas.
3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maxi mum.
4. A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or
greater than the DC or continuous peak operating voltage level.
October 24,2012-REV.07
PAGE . 1
1 page P6SMBJ-AU SERIES
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5K per 7" plastic Reel
October 24,2012-REV.07
PAGE . 5
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet P6SMBJ200-AU.PDF ] |
Número de pieza | Descripción | Fabricantes |
P6SMBJ200-AU | TVS Diode, SMD (Transient Voltage Suppressor) | Pan Jit International |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |