|
|
PDF MT9VDDT6472A Data sheet ( Hoja de datos )
| Número de pieza | MT9VDDT6472A | |
| Descripción | 512MB DDR SDRAM UNBUFFERED DIMM | |
| Fabricantes | Micron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MT9VDDT6472A (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
128MB, 256MB, 512MB (x72, ECC, SR), PC3200
184-Pin DDR SDRAM UDIMM
DDR SDRAM
UNBUFFERED DIMM
MT9VDDT1672A – 128MB
MT9VDDT3272A – 256MB
MT9VDDT6472A – 512MB
For the latest data sheet, please refer to the Micron Web
site: www.micron.com/products/modules
Features
• JEDEC-standard 184-pin dual in-line memory
module (DIMM)
• Fast data transfer rate: PC3200
• CAS Latency 3
• Utilizes 400 MT/s DDR SDRAM components
• Supports ECC error detection and correction
• 128MB (16 Meg x 72), 256MB (32 Meg x 72), 512MB
(64 Meg x 72)
• VDD= VDDQ= +2.6V
• VDDSPD = +2.3V to +3.6V
• +2.6V I/O (SSTL_2 compatible)
• Commands entered on each positive CK edge
• DQS edge-aligned with data for READs; center-
aligned with data for WRITEs
• Internal, pipelined double data rate (DDR)
architecture; two data accesses per clock cycle
• Bidirectional data strobe (DQS) transmitted/
received with data—i.e., source-synchronous data
capture
• Differential clock inputs (CK and CK#)
• Four internal device banks for concurrent operation
• Programmable burst lengths: 2, 4, or 8
• Auto precharge option
• Auto Refresh and Self Refresh Modes
• 15.6µs (128MB), 7.8125µs (256MB, 512MB)
maximum average periodic refresh interval
• Serial Presence-Detect (SPD) with EEPROM
• Programmable READ CAS latency
• Gold edge contacts
Figure 1: 184-Pin DIMM (MO-206)
Standard 1.25in. (31.75mm)
OPTIONS
• Package
184-pin DIMM (standard)
184-pin DIMM (lead-free)
• Frequency/CAS Latency
5ns, 400 MT/s (200 MHz), CL = 3
• PCB
1.25in. (31.75mm)
MARKING
G
Y
-40B
None
Table 1: Address Table
Refresh Count
Row Addressing
Device Bank Addressing
Device Configuration
Column Addressing
Module Rank Addressing
128MB
4K
4K (A0–A11)
4 (BA0, BA1)
128Mb (16 Meg x 8)
1K (A0–A9)
1 (S0#)
256MB
8K
8K (A0–A12)
4 (BA0, BA1)
256Mb (32 Meg x 8)
1K (A0–A9)
1 (S0#)
512MB
8K
8K (A0–A12)
4 (BA0, BA1)
512Mb (64 Meg x 8)
2K (A0–A9, A11)
1 (S0#)
pdf: 09005aef80a43e7d, source: 09005aef80a43d77
DDA9C16_32_64x72AG.fm - Rev. B 9/04 EN
1
©2004 Micron Technology, Inc.
PRODUCTS AND SPECIFICATIONS DISCUSSED HEREIN ARE SUBJECT TO CHANGE BY MICRON WITHOUT NOTICE.
1 page  
128MB, 256MB, 512MB (x72, ECC, SR), PC3200
184-Pin DDR SDRAM UDIMM
Table 5: Pin Descriptions (Continued)
Pin numbers may not correlate with symbols; ; Refer to Pin Assignment Tables on page 3 for more information
2, 4, 6, 8, 12, 13, 19, 20, 23,
24, 28, 31, 33, 35, 39, 40,
53, 55, 57, 60, 61, 64, 68,
69, 72, 73, 79, 80, 83, 84,
87, 88, 94, 95, 98, 99, 105,
106, 109, 110, 117, 121,
131, 133, 146, 147, 150,
151, 153, 155, 161, 162,
165, 166, 170, 171, 174,
175, 178, 179
92
DQ0–DQ63
SCL
181, 182, 183
91
SA0–SA2
SDA
1
7, 15, 22, 30, 38, 54, 62, 70,
77, 85, 96, 104, 108, 112,
120, 128, 136, 143, 148,156,
164, 168, 172, 180
3, 11, 18, 26, 34, 42, 50, 58,
66, 74, 81, 89, 93, 100, 116,
124, 132, 139, 145, 152,
160, 176
184
9, 10, 71, 82, 90, 101, 102,
103, 113, 115 (128MB), 163,
167, 173
111, 158
VREF
VDD, VDDQ
VSS
VDDSPD
NC
DNU
Input/Output Data I/Os: Data bus.
Input
Input
Input/Output
Supply
Supply
Serial Clock for Presence-Detect: SCL is used to
synchronize the presence-detect data transfer to and
from the module.
Presence-Detect Address Inputs: These pins are used to
configure the presence-detect device.
Serial Presence-Detect Data: SDA is a bidirectional pin
used to transfer addresses and data into and out of the
presence- detect portion of the module.
SSTL_2 reference voltage.
Power Supply: +2.6V ±0.1V.
Supply
Ground.
Supply
–
Serial EEPROM positive power supply: +2.3V to +3.6V.
This supply is isolated from the VDD/VDDQ supply.
No Connects.
– Do Not Use: These pins are not connected on this module
but are assigned pins on other modules in this product
family.
pdf: 09005aef80a43e7d, source: 09005aef80a43d77
DDA9C16_32_64x72AG.fm - Rev. B 9/04 EN
5 Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2004 Micron Technology, Inc.
5 Page 
128MB, 256MB, 512MB (x72, ECC, SR), PC3200
184-Pin DDR SDRAM UDIMM
Commands
Table 8, Commands Truth Table, and Table 9, DM
Operation Truth Table, provide a general reference of
available commands. For a more detailed description
of commands and operations, refer to the 128Mb,
256Mb, or 512Mb DDR SDRAM component data
sheets.
Table 8: Commands Truth Table
DESELECT and NOP are functionally interchangeable; all states and sequences not shown are illegal or reserved
NAME (FUNCTION)
DESELECT (NOP)
NO OPERATION (NOP)
ACTIVE (Select bank and activate row)
READ (Select bank and column, and start READ burst)
WRITE (Select bank and column, and start WRITE burst)
BURST TERMINATE
PRECHARGE (Deactivate row in bank or banks)
AUTO REFRESH or SELF REFRESH (Enter self refresh mode)
LOAD MODE REGISTER
CS# RAS# CAS# WE#
HXXX
L HHH
L L HH
LHLH
LHL L
L HH L
L LHL
L LLH
LLLL
ADDR
X
X
Bank/Row
Bank/Col
Bank/Col
X
Code
X
Op-Code
NOTES
1
1
2
3
3
4
5
6, 7
8
NOTE:
1. DESELECT and NOP are functionally interchangeable.
2. BA0–BA1 provide device bank address and A0–A11 (128MB) or A0–A12 (256MB, 512MB) provide device row address.
3. BA0–BA1 provide device bank address; A0–A9 (128MB, 256MB) or A0–A9, A11 (512MB) provide device column address;
A10 HIGH enables the auto precharge feature (nonpersistent), and A10 LOW disables the auto precharge feature.
4. Applies only to read bursts with auto precharge disabled; this command is undefined (and should not be used) for read
bursts with auto precharge enabled and for write bursts.
5. A10 LOW: BA0–BA1 determine which device bank is precharged. A10 HIGH: all device banks are precharged and BA0–
BA1 are “Don’t Care.”
6. This command is AUTO REFRESH if CKE is HIGH, SELF REFRESH if CKE is LOW.
7. Internal refresh counter controls device row addressing; all inputs and I/Os are “Don’t Care” except for CKE.
8. BA0-BA1 select either the mode register or the extended mode register (BA0 = 0, BA1 = 0 select the mode register; BA0 =
1, BA1 = 0 select extended mode register; other combinations of BA0–BA1 are reserved). A0–A11 (128MB) or A0–A12
(256MB, 512MB) provide the op-code to be written to the selected mode register.
Table 9: DM Operation Truth Table
Used to mask write data; provided coincident with the corresponding data
WRITE Enable
WRITE Inhibit
NAME (FUNCTION)
DM DQS
L Valid
HX
pdf: 09005aef80a43e7d, source: 09005aef80a43d77
DDA9C16_32_64x72AG.fm - Rev. B 9/04 EN
11
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2004 Micron Technology, Inc.
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet MT9VDDT6472A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MT9VDDT6472A | 512MB DDR SDRAM UNBUFFERED DIMM | Micron |
| MT9VDDT6472H | 512MB DDR SDRAM SODIMM | Micron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |