DataSheet.es    


PDF L130-4090001400001 Data sheet ( Hoja de datos )

Número de pieza L130-4090001400001
Descripción 3014 LED
Fabricantes Luminus 
Logotipo Luminus Logotipo



Hay una vista previa y un enlace de descarga de L130-4090001400001 (archivo pdf) en la parte inferior de esta página.


Total 25 Páginas

No Preview Available ! L130-4090001400001 Hoja de datos, Descripción, Manual

LUXEON 3014
Hot-color targeted industry standard
package for uniform light
LUXEON 3014 is an industry standard compatible footprint for ease
of installation into existing 3014 sockets and stays consistent with a
3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted
at operating conditions—65°C. This low power device is an ideal
choice when uniformity and reduction in spottiness is necessary for
indoor designs.
Illumination
Features and Benefits
Industry standard footprint and package offering compatibility with
existing designs
1/9th ANSI micro-color binning enables tight color control
Hot-color targeted at 65°C which leads to better color accuracy
Rectangular package design allows for increased uniformity
Drive at maximum current, 120mA for superior value
Primary Applications
Indoor Area Lighting
Lamps
Specialty Lighting
–– Monochrome LED
–– Channel Lighting
–– Signage
DS208 LUXEON 3014 Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
No. E352519
RoHS
COMPLIANT

1 page




L130-4090001400001 pdf
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 3014 at 60mA, Tj=25ºC.
Part Number
Forward Voltage [1] (V)
Minimum Typical MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage (mV/°C) [2]
L130-xxxxxx1400001
2.8 3.1
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
3.3
-2.0 to -4.0
Typical Thermal
Resistance—Junction
to Solder Pad (°C/W)
35
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 3014.
Parameter
Maximum Performance
DC Forward Current [1,2]
120mA
Peak Pulsed Forward Current [1,3]
150mA
LED Junction Temperature [1] (DC & Pulse)
115°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 2
Operating Case Temperature [1]
-40°C to 105°C
LED Storage Temperature
-40°C to 100°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
-5V
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current
3. At 10% duty cycle with pulse width of 10ms.
DS208 LUXEON 3014 Product Datasheet 20170123 ©2017 Lumileds Holding B.V. All rights reserved.
4

5 Page





L130-4090001400001 arduino
Color Bin Definitions
Figure 6. 3-, 4- and 5-step MacAdam ellipse illustration for Table 6.
Figure 7a. Color bin structure for LUXEON 3014 2200K, hot-color targeted at Tj=65°C.
Table 6a. 3- and 5-step MacAdam ellipse color bin definitions for L130-22xxHE1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
2200K
Single 3-step MacAdam ellipse
(0.5037, 0.4142)
0.0072
0.0042
51.0°
2200K
Single 5-step MacAdam ellipse
(0.5037, 0.4142)
0.0120
0.0070
51.0°
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170123 ©2017 Lumileds Holding B.V. All rights reserved.
10

11 Page







PáginasTotal 25 Páginas
PDF Descargar[ Datasheet L130-4090001400001.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
L130-40900014000013014 LEDLuminus
Luminus

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar