DataSheet.es    


PDF CB1AA-10S-1.5H Data sheet ( Hoja de datos )

Número de pieza CB1AA-10S-1.5H
Descripción Memory Stick Connectors
Fabricantes Hirose Electric 
Logotipo Hirose Electric Logotipo



Hay una vista previa y un enlace de descarga de CB1AA-10S-1.5H (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! CB1AA-10S-1.5H Hoja de datos, Descripción, Manual

NEW
Memory Stick® Connectors
CB1 Series
Card Push Insert/Push Eject
<CB1G Series>
sOutline
Receptacle connectors for use with the new generation of
digital media devices requiring “Memory Stick®” type of
consumer removable memory card.
Several variations are available: Miniature, Low Profile and
with or without ejection mechanism.
sFeatures
1. Indication of Incorrect Card Insertion
The connector will not allow the card to be complete
inserted from the wrong end or reversed.
The card will stop about 7mm before complete insertion
position, visually indicating incorrect insertion.
2. Protection of the Contacts
Incorrect insertion of the card will not damage the
contacts. The card can be easily withdrawn and re-
inserted correctly.
3. Excellent Card Handling
The type that is equipped with an ejection mechanism
provides a long ejection of the card which offers excellent
card handling qualities.
*Memory Stick is a registered trademark of the Sony Corporation.
q Card ejection distance of 10 mm
q Mounting height of 3.5 mm
q Mounting area: Smaller design is 78% of former
size
Button Touch Ejection
<CB1F Series>
q Card ejection with tactile button operation
q Card ejection distance of 10 mm
q Equipped with card ejection switch
Without Card Ejection
<CB1D Series>
q Miniaturized, low profile design
q Improved installation to the equipment is permitted
using (M1.7) tapping screws
q Can be equipped with an ejection mechanism
depending on the design of the equipment side
portion
Note: Please position the card ejection button at the side of the equipment.
2003.12
1

1 page




CB1AA-10S-1.5H pdf
sLeft Ejection
23.1
21.8
4.45 Memory stick card outline
8.75
16.45
3.65 0.1
4.05
Part No.
CL No.
CB1C-10S-1.5H-EJL(56) CL689-0006-1-56
BPCB mounting pattern
Front edge of the printed
circuit board
10.5±0.03
2-Ø1.3+00.05
0.9±0.1
P= 1.5±0.05
13.5±0.05
3.2±0.1
4.55±0.05
sRight Ejection
29.9
CONTACT No.1
Ø1.8
10.5
2 0.6
4.55 P=1.5
13.5
9.25 17.35
4.05
Memory stick card outline 4.4
3.65
23
21.8
Part No.
CL No.
CB1C-10S-1.5H-EJR(59) CL689-0007-4-59
BPCB mounting pattern
Front edge of the printed
circuit board
10.5±0.03
2-Ø1.3+0.005
0.9±0.1
P=1.5±0.05
13.5±0.05
3.2±0.1
4.55±0.05
10.5
2 0.6
4.55 P=1.5
13.5
31.2
CONTACT No.1
5

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet CB1AA-10S-1.5H.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CB1AA-10S-1.5HMemory Stick ConnectorsHirose Electric
Hirose Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar