DataSheet.es    


PDF ABC020002A08-YIY-R Data sheet ( Hoja de datos )

Número de pieza ABC020002A08-YIY-R
Descripción LCM MODULE
Fabricantes GEMINI 
Logotipo GEMINI Logotipo



Hay una vista previa y un enlace de descarga de ABC020002A08-YIY-R (archivo pdf) en la parte inferior de esta página.


Total 23 Páginas

No Preview Available ! ABC020002A08-YIY-R Hoja de datos, Descripción, Manual

SPECIFICATION
FOR
LCM MODULE
MODULE NO.: ABC020002A08-YIY-R-04
DOC.REVISION 00
Customer Approval:
PREPARED BY
(RD ENGINEER)
PREPARED BY
(QA ENGINEER)
CHECKED BY
APPROVED BY
SIGNATURE
DATE
F

1 page




ABC020002A08-YIY-R pdf
4. DIMENSIONAL OUTLINE
Figure 2. Dimensional outline
2
`
Free Datasheet http://www.datasheet4u.com/

5 Page





ABC020002A08-YIY-R arduino
13. PRECAUTION FOR USING LCD/LCM
After reliability test, recovery time should be 24 hours minimum. Moreover, functions, performance
and appearance shall be free from remarkable deterioration within 50,000 hoursaverageunder
ordinary operating and storage conditions room temperature (20+8°C), normal humidity (below 65% RH),
and in the area not exposed to direct sun light. Using LCM beyond these conditions will shorten the life
time.
Precaution for using LCD/LCM
LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make any
alteration or modification. The followings should be noted.
General Precautions:
1. LCD panel is made of glass. Avoid excessive mechanical shock or applying strong pressure onto the
surface of display area.
2. The polarizer used on the display surface is easily scratched and damaged. Extreme care should be
taken when handling. To clean dust or dirt off the display surface, wipe gently with cotton, or other soft
material soaked with isoproply alcohol, ethyl alcohol or trichlorotriflorothane, do not use water, ketone
or aromatics and never scrub hard.
3. Do not tamper in any way with the tabs on the metal frame.
4. Do not make any modification on the PCB without consulting Gemini.
5. When mounting a LCM, make sure that the PCB is not under any stress such as bending or twisting.
Elastomer contacts are very delicate and missing pixels could result from slight dislocation of any of
the elements.
6. Avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed and lose
contact, resulting in missing pixels and also cause rainbow on the display.
7. Be careful not to touch or swallow liquid crystal that might leak from a damaged cell. Any liquid
crystal adheres to skin or clothes, wash it off immediately with soap and water.
Static Electricity Precautions:
1. CMOS-LSI is used for the module circuit; therefore operators should be grounded whenever he/she
comes into contact with the module.
2. Do not touch any of the conductive parts such as the LSI pads; the copper leads on the PCB and the
interface terminals with any parts of the human body.
3. Do not touch the connection terminals of the display with bare hand; it will cause disconnection or
defective insulation of terminals.
4. The modules should be kept in anti-static bags or other containers resistant to static for storage.
5. Only properly grounded soldering irons should be used.
8
Free Datasheet http://www.datasheet4u.com/

11 Page







PáginasTotal 23 Páginas
PDF Descargar[ Datasheet ABC020002A08-YIY-R.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ABC020002A08-YIY-RLCM MODULEGEMINI
GEMINI
ABC020002A08-YIY-R-04LCM MODULEAV-Display
AV-Display

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar