|
|
Número de pieza | NTCAIMME3 | |
Descripción | NTC Thermistors / Miniature Immersion Sensor | |
Fabricantes | Vishay | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NTCAIMME3 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! www.vishay.com
NTCAIMME3
Vishay BCcomponents
NTC Thermistors, Miniature Immersion Sensor
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
10K
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Operating temperature range
at zero dissipation
Response time t 63.2 % of T
(air 25°C to water 85°C)
±3
3984
± 0.5
-25 to +105
1.5
%
K
%
°C
s
Dissipation factor
Mounted in still air
2.8 mW/K
In still water
5.6
Maximum power dissipation at 55 °C
100
mW
Min. dielectric withstanding voltage
between terminals and capsule (10 s)
500
VAC
Insulation resistance at 500 VDC
Thermal gradient
> 100M
< 0.02
K/K
Weight
2.1 g
Note
• Other R25 values and tolerances available upon request
Fig. 1 - Mounting example with sealing ring and screw
FEATURES
• Fast time response for fluid immersion
applications
• Reduced thermal gradient, due to the use of
small tip dimensions and thin insulated wire
• Sensor for permanent contact with water or
other liquids
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
Immersion sensor used for temperature measurement,
sensing and control in:
• Water boilers
• Heating systems
• Chiller systems
• Water and used water systems
• Water and oil tanks
• Consumer appliances, Coffee machines
• Industrial appliances
• Solar heating systems
DESCRIPTION
Miniature insulated chip NTC thermistor mounted in a
SS304 housing with or without brass collar for sealed
mounting and twin PVC insulated AWG#30 lead wire
connection.
MOUNTING
• The sensor can be mounted by means of a sealing O-ring
and screw
• The end wire can be soldered, or crimped to a connector
• Optional connector for Wire-to-Wire or Wire-to-Board
connections
• The contact area with the liquid is preferably min 10 mm
down from the tip and max to the brass collar location (see
Fig. 1 for mounting example)
• Not intended for corrosive or high acidic liquids
• The epoxy lead-wire side can not be in permanent contact
with liquids, or water
PACKAGING
Available in plastic bags of 250 pieces.
DESIGN-IN SUPPORT
• Other resistance curves and tolerances are available on
request
• Consult Vishay for other lead length
• 3D solid models: www.vishay.com/doc?29106
• For complete RT curve computation, visit:
www.vishay.com/thermistors/ntc-curve-list/
ELECTRICAL DATA AND ORDERING INFORMATION
R25 R25-TOL. B25/85 B25/85-TOL.
() (%) (K) (± %)
DESCRIPTION
10 000
±3
3984
0.5
NTC Immersion 10K 3 % 3984K 0.5 %
10 000
±3
3984
0.5
NTC 10K 3 % 3984K 0.5 % no ring
SAP MATERIAL AND
ORDERING NUMBER
NTCAIMME3C90373
NTCAIMME3C90686
Revision: 03-Mar-17
1 Document Number: 29131
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet NTCAIMME3.PDF ] |
Número de pieza | Descripción | Fabricantes |
NTCAIMME3 | NTC Thermistors / Miniature Immersion Sensor | Vishay |
NTCAIMME3C90042 | Steel Capped Sensors | Vishay |
NTCAIMME3C90373 | Miniature Immersion Sensor | Vishay |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |