|
|
PDF LH1525ACDTR Data sheet ( Hoja de datos )
| Número de pieza | LH1525ACDTR | |
| Descripción | 1 Form A Solid State Relay | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LH1525ACDTR (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
1 Form A Solid State Relay
LH1525ACD/ ACDTR
Vishay Semiconductors
Features
• High-speed Operation
• 2500 VRMS I/O Isolation
• Current-limit Protection
• High Surge Capability
• Load Voltage 400 V
• Clean, Bounce-free Switching
• Extremely Low Power Consumption
• High-reliability Monolithic Receptor
• Surface-mountable
• Lead-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code S
• CSA - Certification 093751
• FIMKO Approval
Applications
PCMCIA Type 2 Cards
Battery Powered Switch Applications
General Telecom Switching
Telephone Line Interface
- On/off Hook
- Ring Relay
- Ground Start
Programmable Controllers
Instrumentation
S
NC
Heat Sink
8
SS
S'
5
12 34
i179047
S S'
e3 Pb
Pb-free
Description
The LH1525 relay is an SPST normally open switch (1
Form A ) in small-outline package (SOP 8 pin). Relay
requires a minimal amount of LED drive current to
operate, making relay ideal for battery powered and
power consumption sensitive applications.
The relay is constructed using a GaAlAs LED for actu-
ation control and an integrated monolithic die for the
switch output. The die, fabricated in a high-voltage
dielectrically isolated BCDMOS technology, is com-
prised of a photodiode array, switch-control circuitry,
and MOSFET switches. In addition, the relay employs
current-limiting circuitry enabling it to pass FCC
68.302 and other regulatory surge requirements
when overvoltage protection is provided.
Order Information
Part
LH1525ACD
LH1525ACDTR
Remarks
8-pin SOP, Tubes
8-pin SOP, Tape and Reel
Document Number 83824
Rev. 1.3, 26-Oct-03
www.vishay.com
1
1 page  
LH1525ACD/ ACDTR
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
Document Number 83824
Rev. 1.3, 26-Oct-03
www.vishay.com
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LH1525ACDTR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LH1525ACDTR | 1 Form A Solid State Relay | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |