|
|
PDF NTCLE305E4202SB Data sheet ( Hoja de datos )
| Número de pieza | NTCLE305E4202SB | |
| Descripción | NTC Thermistors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTCLE305E4202SB (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
NTCLE305E4…SB
Vishay BCcomponents
NTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads
QUICK REFERENCE DATA
PARAMETER
VALUE
Resistance value
at 25 C
2.06K to 10K
Tolerance on R25-value
B25/85-value
Tolerance on B25/85
Accuracy of temperature
measurement
± 1.92; ± 2.19
3511 to 3984
± 0.5 to ± 1
± 0.5 between 25 and 85
Operating temperature
range
- 40 to + 125
Maximum power
dissipation at 55 °C
50
Dissipation factor
(in still air)
0.8
Response time
(in stirred air)
(in oil)
3
0.7
Climatic category
(LCT/UCT/days)
40/125/56
Minimum dielectric
withstanding voltage
between leads
termination and
coated body
100
Weight
0.05
UNIT
%
K
%
°C
°C
mW
mW/K
s
VRMS
g
FEATURES
• Flexible insulated leads for special mounting
or assembly
• Miniature sized very fast reacting
• Accurate over a wide temperature range
• High stability over a long life
• Exceptional withstanding in thermal shocks
• AEC-Q200 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Fulfils the ELV 2000/53/EC
APPLICATIONS
• Temperature measurement, sensing and control in
automotive and industrial applications
DESCRIPTION
These negative temperature coefficient thermistors consist
of a micro NTC chip with two insulated solid silver plated
nickel wires and coated with a ochre-colored epoxy lacquer.
PACKAGING
The thermistors are packed in cardboard boxes; the
smallest packing quantity is 1000 pieces.
MARKING
The components are not marked.
DESIGN-IN SUPPORT
R(T) tables spreadsheet available on request at
MOUNTING
By soldering or welding in any position.
The parts can be potted in suitable resins.
ELECTRICAL DATA AND ORDERING INFORMATION
SAP PART AND
ORDERING NUMBER
NTCLE305E4202SB
NTCLE305E4502SB
NTCLE305E4103SB
R25 (1)
()
2060
5000
10 000
(25 °C)
(%/K)
- 3.85
- 4.39
- 4.39
R25 TOL.
(%)
1.92
2.19
2.19
Notes
(1) Other R25 and B-values available on request
(2) T is the temperature measurement accuracy in the defined temperature range
B25/85 (1)
(K)
3511
3984
3984
B25/85 TOL.
(%)
1.0
0.5
0.5
TMAX. (2)
25 TO 85
(°C)
± 0.5
± 0.5
± 0.5
Document Number: 29076
Revision: 16-May-11
For technical questions, contact: [email protected]
www.vishay.com
89
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet NTCLE305E4202SB.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTCLE305E4202SB | NTC Thermistors | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |