DataSheet.es    


PDF ADV7280 Data sheet ( Hoja de datos )

Número de pieza ADV7280
Descripción 4x Oversampled SDTV Video Decoder
Fabricantes Analog Devices 
Logotipo Analog Devices Logotipo



Hay una vista previa y un enlace de descarga de ADV7280 (archivo pdf) en la parte inferior de esta página.


Total 29 Páginas

No Preview Available ! ADV7280 Hoja de datos, Descripción, Manual

Data Sheet
10-Bit, 4× Oversampled SDTV
Video Decoder with Deinterlacer
ADV7280
FEATURES
Worldwide NTSC/PAL/SECAM color demodulation support
One 10-bit analog-to-digital converter (ADC), 4× oversampling
per channel for CVBS, Y/C, and YPrPb modes
Analog video input channels with on-chip antialiasing filter
ADV7280: up to 4 input channels
ADV7280-M: up to 8 input channels
Video input support for CVBS (composite), Y/C (S-Video),
and YPrPb (component)
NTSC/PAL/SECAM autodetection
Up to 1.47 V common-mode input range solution
Excellent common-mode noise rejection capabilities
5-line adaptive 2D comb filter and CTI video enhancement
Adaptive Digital Line Length Tracking (ADLLT), signal
processing, and enhanced FIFO management provide
mini-time base correction (TBC) functionality
Integrated automatic gain control (AGC) with adaptive
peak white mode
Fast switching capability
Integrated interlaced-to-progressive (I2P) video output
converter
Adaptive contrast enhancement (ACE)
Down dither (8-bit to 6-bit)
Rovi (Macrovision) copy protection detection
MIPI CSI-2 output interface (ADV7280-M)
8-bit ITU-R BT.656 YCrCb 4:2:2 output and HS, VS, or field
synchronization (ADV7280)
Full featured vertical blanking interval (VBI) data slicer
Power-down mode available
2-wire, I2C-compatible serial interface
Qualified for automotive applications
−40°C to +105°C temperature grade
32-lead, 5 mm × 5 mm, RoHS-compliant LFCSP
APPLICATIONS
Smartphone/multimedia handsets
Automotive infotainment
DVRs for video security
Media players
GENERAL DESCRIPTION
The ADV7280/ADV7280-M are versatile one-chip, multiformat
video decoders. The ADV7280/ADV7280-M automatically detect
standard analog baseband video signals compatible with worldwide
NTSC, PAL, and SECAM standards in the form of composite,
S-Video, and component video.
The ADV7280 converts the analog video signals into a YCrCb
4:2:2 video data stream that is compatible with the 8-bit ITU-R
BT.656 interface standard. The ADV7280-M converts the analog
video signals into an 8-bit YCrCb 4:2:2 video data stream that is
output over a mobile industry processor interface (MIPI®) CSI-2
interface.
The analog video inputs of the ADV7280/ADV7280-M accept
single-ended signals. The ADV7280 provides four analog inputs;
the ADV7280-M provides eight analog inputs. The ADV7280
and ADV7280-M support I2P conversion.
The ADV7280/ADV7280-M are programmed via a 2-wire,
serial bidirectional port (I2C compatible) and are fabricated in a
1.8 V CMOS process. The LFCSP package option makes these
decoders ideal for space-constrained portable applications.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

1 page




ADV7280 pdf
ADV7280
Data Sheet
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
AVDD, DVDD, PVDD, and MVDD = 1.71 V to 1.89 V, DVDDIO = 2.97 V to 3.63 V, specified at operating temperature range, unless otherwise noted.
MVDD applies to the ADV7280-M only.
Table 1.
Parameter
Symbol Test Conditions/Comments Min Typ Max Unit
STATIC PERFORMANCE
ADC Resolution
N
10 Bits
Integral Nonlinearity
INL CVBS mode
2 LSB
Differential Nonlinearity
DNL CVBS mode
±0.6 LSB
DIGITAL INPUTS
Input High Voltage
Input Low Voltage
Input Leakage Current
VIH DVDDIO = 3.3 V
2
DVDDIO = 1.8 V, ADV7280 only
1.2
VIL DVDDIO = 3.3 V
DVDDIO = 1.8 V, ADV7280 only
IIN RESET pin
−10
V
V
0.8 V
0.4 V
+10 µA
SDATA, SCLK pins
−10
+15 µA
PWRDWN, ALSB pins
−10
+50 µA
Input Capacitance
CIN
10 pF
CRYSTAL INPUT
Input High Voltage
Input Low Voltage
VIH XTALN pin
VIL XTALN pin
1.2 V
0.4 V
DIGITAL OUTPUTS
Output High Voltage
VOH
DVDDIO = 3.3 V, ISOURCE = 0.4 mA
2.4
DVDDIO = 1.8 V, ISOURCE = 0.4 mA,
ADV7280 only
1.4
V
V
Output Low Voltage
VOL DVDDIO = 3.3 V, ISINK = 3.2 mA
DVDDIO = 1.8 V, ISINK = 1.6 mA,
ADV7280 only
0.4 V
0.2 V
High Impedance Leakage Current
Output Capacitance
ILEAK
COUT
10 µA
20 pF
POWER REQUIREMENTS1, 2, 3
Digital I/O Power Supply
DVDDIO
ADV7280-M
ADV7280
2.97 3.3
1.62 3.3
3.63 V
3.63 V
PLL Power Supply
Analog Power Supply
Digital Power Supply
MIPI Tx Power Supply
Digital I/O Supply Current
PVDD
AVDD
DVDD
MVDD
IDVDDIO
ADV7280-M only
ADV7280-M
ADV7280
1.71 1.8
1.71 1.8
1.71 1.8
1.71 1.8
1.5
5
1.89 V
1.89 V
1.89 V
1.89 V
mA
mA
PLL Supply Current
MIPI Tx Supply Current
Analog Supply Current
Single-Ended CVBS Input
IPVDD
IMVDD
IAVDD
ADV7280-M only
12 mA
14 mA
47 mA
Y/C Input
60 mA
YPrPb Input
75 mA
Digital Supply Current
Single-Ended CVBS Input
IDVDD
70 mA
Y/C Input
70 mA
YPrPb Input
70 mA
Rev. A | Page 4 of 28

5 Page





ADV7280 arduino
ADV7280
ABSOLUTE MAXIMUM RATINGS
Table 7.
Parameter
AVDD to DGND
DVDD to DGND
PVDD to DGND
MVDD to DGND1
DVDDIO to DGND
PVDD to DVDD
MVDD to DVDD1
AVDD to DVDD
Digital Inputs Voltage
Digital Outputs Voltage
Analog Inputs to Ground
Maximum Junction Temperature
(TJ max)
Storage Temperature Range
Infrared Reflow Soldering
(20 sec)
Rating
2.2 V
2.2 V
2.2 V
2.2 V
4V
−0.9 V to +0.9 V
−0.9 V to +0.9 V
−0.9 V to +0.9 V
DGND − 0.3 V to DVDDIO + 0.3 V
DGND − 0.3 V to DVDDIO + 0.3 V
Ground − 0.3 V to AVDD + 0.3 V
140°C
−65°C to +150°C
260°C
1 MVDD applies to the ADV7280-M only.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
These devices are high performance integrated circuits with
an ESD rating of <2 kV, and they are ESD sensitive. Proper
precautions must be taken for handling and assembly.
Data Sheet
THERMAL RESISTANCE
The thermal resistance values in Table 8 are specified for the
device soldered onto a 4-layer printed circuit board (PCB) with
a common ground plane and with the exposed pad of the device
connected to DGND. The values in Table 8 are maximum values.
Table 8. Thermal Resistance for the 32-Lead LFCSP
Thermal Characteristic
Symbol Value Unit
Junction-to-Ambient Thermal θJA
Resistance (Still Air)
32.5 °C/W
Junction-to-Case Thermal
Resistance
θJC
2.3 °C/W
REFLOW SOLDER
The ADV7280/ADV7280-M are Pb-free, environmentally
friendly products. They are manufactured using the most up-to-
date materials and processes. The coating on the leads of each
device is 100% pure Sn electroplate. The devices are suitable for
Pb-free applications and can withstand surface-mount soldering
at up to 255°C (±5°C).
In addition, the ADV7280/ADV7280-M are backward-
compatible with conventional SnPb soldering processes. This
means that the electroplated Sn coating can be soldered with
Sn/Pb solder pastes at conventional reflow temperatures of
220°C to 235°C.
ESD CAUTION
Rev. A | Page 10 of 28

11 Page







PáginasTotal 29 Páginas
PDF Descargar[ Datasheet ADV7280.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ADV72804x Oversampled SDTV Video DecoderAnalog Devices
Analog Devices
ADV72814x Oversampled SDTV Video DecoderAnalog Devices
Analog Devices
ADV72824x Oversampled SDTV Video DecoderAnalog Devices
Analog Devices
ADV72834x Oversampled SDTV Video DecoderAnalog Devices
Analog Devices

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar