DataSheet.es    


PDF 575Di45-12 Data sheet ( Hoja de datos )

Número de pieza 575Di45-12
Descripción Solid-State Relays
Fabricantes OPTO22 
Logotipo OPTO22 Logotipo



Hay una vista previa y un enlace de descarga de 575Di45-12 (archivo pdf) en la parte inferior de esta página.


Total 23 Páginas

No Preview Available ! 575Di45-12 Hoja de datos, Descripción, Manual

Solid-State Relays
Features
Rugged, epoxy encapsulation construction
4,000 volts of optical isolation
Subjected to full load test and six times the rated
current surge before and after encapsulation
Unique heat-spreader technology
Guaranteed for life
Opto 22 Power
Series SSR
improvements and the same 100% testing policy established
over 40 years ago, Opto 22 is still recognized today for the very
high quality and reliability of all our solid-state relays.
Overview
In 1974, Opto 22 introduced the first liquid epoxy-filled line of
power solid-state relays (SSR). This innovation in SSR design
greatly improved the reliability and reduced the cost of
manufacturing. At that time, we also incorporated into our
manufacturing process 100% testing under full load
conditions of every relay we produced.
By 1978, Opto 22 had gained such a reputation for reliability
that we were recognized as the world’s leading manufacturer
of solid-state relays. Through continuous manufacturing
Part Numbers
Part
Description
AC Switching
120A10
120A25
240A10
240A25
240A45
120D3
120D10
120D25
120D45
240D3
240D10
240Di10
240D25
240Di25
240D30-HS
240D45
240Di45
380D25
380D45
480D10-12
480D15-12
480D25-12
480D25-HS
480D45-12
120 VAC, 10 Amp, AC Control
120 VAC, 25 Amp, AC Control
240 VAC, 10 Amp, AC Control
240 VAC, 25 Amp, AC Control
240 VAC, 45 Amp, AC Control
120 VAC, 3 Amp, DC Control
120 VAC, 10 Amp, DC Control
120 VAC, 25 Amp, DC Control
120 VAC, 45 Amp, DC Control
240 VAC, 3 Amp, DC Control
240 VAC, 10 Amp, DC Control
240 VAC, 10 Amp, DC Control, with LED Indica-
tors
240 VAC, 25 Amp, DC Control
240 VAC, 25 Amp, DC Control, with LED Indica-
tors
240 VAC, 30 Amp, DC Control, with integrated
heatsink
240 VAC, 45 Amp, DC Control
240 VAC, 45 Amp, DC Control, with LED Indica-
tors
380 VAC, 25 Amp, DC Control
380 VAC, 45 Amp, DC Control
480 VAC, 10 Amp, DC Control, Transient Proof
480 VAC, 15 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof,
with integrated heatsink
480 VAC, 45 Amp, DC Control, Transient Proof
Description
Opto 22 offers a complete line of SSRs, from the rugged 120/
240/380-volt AC Series to the small footprint MP Series,
designed for mounting on printed circuit boards. All Opto 22
SSRs feature 4,000 volts of optical isolation, and most are UL
and CSA recognized. The innovative use of room-temperature
liquid epoxy encapsulation, coupled with Opto 22’s unique
heat-spreader technology, are key to mass producing the
world’s most reliable solid state relays.
Every Opto 22 solid state relay is subjected to full load test and
six times the rated current surge both before and after
Part
Description
AC Switching
575D15-12
575D45-12
575D30-HS
575Di45-12
MP120D2
or P120D2
MP120D4
or P120D4
MP240D2
or P240D2
MP240D4
or P240D4
MP380D4
Z120D10
Z240D10
575 VAC, 15 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 30 Amp, DC Control, Transient Proof,
with integrated heatsink
575 VAC, 45 Amp, DC Control, Transient Proof,
with LED Indicators
120 VAC, 2 Amp, DC Control.
P model is low profile.
120 VAC, 4 Amp, DC Control.
P model is low profile.
240 VAC, 2 Amp, DC.
P model is low profile.
240 VAC, 4 Amp, DC.
P model is low profile.
380 VAC, 4 Amp, DC
Z Model, 120 VAC, 10 Amp, DC Control
Z Model, 240 VAC, 10 Amp, DC Control
DC Switching
DC60P or
DC60MP
DC200P or
DC200MP
DC60S-3
DC60S-5
60 VDC, 3 Amp, DC Control.
P model is low profile.
200 VDC, 1 Amp, DC Control.
P model is low profile.
60 VDC, 3 Amp, DC Control
60 VDC, 5 Amp, DC Control
Accessories
SAFETY COVER
SSR-HS
SSR-THERMOPAD
Power Series SSR safety cover
Power Series SSR heatsink
Thermal conductive pad (pack of 10)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1

1 page




575Di45-12 pdf
Solid-State Relays
120/240/380 Volt (cont.)
Surge Current Data
Time
(Seconds)
Time*
(Cycles)
3-Amp
Peak
Amps
10-Amp 25-Amp 45-Amp
Peak Peak Peak
Amps Amps Amps
0.017
1 85 110 250 650
0.050
3 66 85 175 420
0.100
6 53 70 140 320
0.200
12 45 60 112 245
0.500
30 37 50 80 175
1 60 31 40 67 134
2
120 28
33
53 119
3
180 27
32
49
98
4
240 26
31
47
95
5
300 25
30
45
91
10
600 24
28
42
84
Note: *60 HZ.
Connection Diagram, AC Power Series
Thermal Ratings
Dimensional Drawings
Mounted on a heat sink with
2 °C/watt rating
Mounted on a heat sink with
1 °C/watt rating
NOTE: All dimensions are nominal. We do not recommend mounting the terminal side of the SSR to a flat PCB (printed circuit board) or
other flat surface, because there may be some variation in terminal height from one terminal to another and from one SSR to another.
Side view: Part numbers
DC60S3, 120D3, and
240D3 only
3-32VDC Control
+
Side view: All other
part numbers
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
5

5 Page





575Di45-12 arduino
Solid-State Relays
DC Switching Series Specifications
DC60P
or DC60MP
DC200P or
DC200MP
DC60S-3
DC60S-5
Operating Voltage
Range
5–60 VDC 5–200 VDC 5–60 VDC 5–60 VDC
Forward Voltage Drop
1.5 volts
at 3 amps
1.5 volts
at 1 amp
1.5 volts 1.5 volts
at 3 amps at 5 amps
Nominal Currrent Rating 3 amps
1 amp
3 amps
5 amps
Off-State Blocking
60 VDC
250 VDC 60 VDC
60 VDC
Signal Pickup Voltage
3 VDC
32 Volts*
allowed
3 VDC
32 Volts*
allowed
3 VDC
32 Volts
allowed
3 VDC
32 Volts
allowed
Signal Dropout Voltage 1 VDC
1 VDC
1 VDC
1 VDC
Signal Input Impedance 1,000 ohms 1,000 ohms 1,000 ohms 1,000 ohms
1 Second Surge
5 amps
2 amps
5 amps
10 amps
Operating Temp. Range
–40 °C to
100 °C
–40 °C to
100 °C
–40 °C to
100 °C
–40 °C to
100 °C
Isolation Voltage
4,000 VRMS 4,000 VRMS 4,000 VRMS 4,000 VRMS
Off-State Leakage
1 mA
maximum
1 mA
1 mA
1 mA
maximum maximum maximum
Package Type
P/MP series
P/MP series
Power
series
Power
series
Turn-on Time
100 usec
100 usec 100 usec 100 usec
Turn-off Time
750 usec
750 usec 750 usec 750 usec
Note: *MP series maximum allowed control signal is 24 VDC.
Thermal Ratings
NOTE: When controlling an inductive load, like a solenoid or coil, a commutating diode
must be used. Install the commutating diode across the terminals of the load (not the
SSR terminals). This will protect the SSR from damage caused by voltage spikes when
turning off the load.
Mounted on a heat sink with
2 °C/watt rating
Model DC60MP Basic Schematic (also applies to the other SSRs on this page)
*Control Current varies with control voltage. See “Control
Current Calculation” on page 17 for information.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
11

11 Page







PáginasTotal 23 Páginas
PDF Descargar[ Datasheet 575Di45-12.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
575Di45-12Solid-State RelaysOPTO22
OPTO22

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar