|
|
PDF ICR18650-26JM Data sheet ( Hoja de datos )
| Número de pieza | ICR18650-26JM | |
| Descripción | Lexel Battery | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ICR18650-26JM (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
-SAMSUNG SDI Confidential Proprietary –
Spec. No. ICR18650-26JM Version No.
1.0
SPECIFICATION OF PRODUCT
1. Customer: Lexel Battery(Shenzhen)
2. Product: SAMSUNG SDI in Malaysia
3. Model : ICR18650-26JM
4. Received Marking
Division
Signature
Date
// // //
5. Date of Application (YY/MM/DD) : 2015/9/8
6. Supplier:
SAMSUNG SDI Co., Ltd. Energy Division.
Issued
Approved
J,H.KO
Michael.rim
0
1 page  
-SAMSUNG SDI Confidential Proprietary –
Spec. No. ICR18650-26JM Version No.
1.0
4. Outline Dimensions
See the Fig. 1
Max. 18.40
Max. 65.00
Unit : mm
Fig.1. Outline Dimensions of ICR18650-26JM
4
5 Page 
-SAMSUNG SDI Confidential Proprietary –
Spec. No. ICR18650-26JM Version No.
1.0
Proper Use and Handling of Lithium Ion Cells
See before using lithium-ion cell
Supplied by
Samsung SDI Co., Ltd.
1. General
This document has been prepared to describe the appropriate cautions and
prohibitions, which the customer should take or employ when the customer uses
and handles the lithium ion cell to be manufactured and supplied by Samsung SDI Co.,
Ltd., in order to obtain optimum performance and safety.
2. Charging
2.1 Charging current
Charging current should be less than maximum charge current specified in
the product specification.
2.2 Charging voltage
Charging should be done by voltage less than that specified in
the product specification.
2.3 Charging time
Continuous charging under appropriate voltage does not cause any loss of
characteristics. However, the charge timer is recommended to be installed
from a safety consideration, which shuts off further charging at time specified
in the product specification.
2.4 Charging temperature
The cell should be charged within a range of specified temperatures in
the product specification.
2.5 Reverse charging
The cell should be connected, confirming that its poles are correctly aligned.
Inverse charging should be strictly prohibited. If the cell is connected
improperly, it may be damaged.
3. Discharging
3.1 Discharging
3.1.1 The cell should be discharged at less than maximum discharge current
specified in the product specification.
3.2 Discharging temperature
3.2.1 The cell should be discharged within a range of temperatures specified in
10
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet ICR18650-26JM.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ICR18650-26JM | Lexel Battery | Samsung |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |