|
|
Número de pieza | ZIOL2411 | |
Descripción | IO-Link compliant HV Line Driver | |
Fabricantes | IDT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ZIOL2411 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! IO-Link compliant HV Line
Driver (Dual Channel)
ZIOL2411
Feature Sheet
Brief Description
The ZIOL2411 is a line driver/level shifter IC that
provides two independent HV* I/O channels with a
wide range of configurable system features. It
addresses the physical layer of sensor/actuator sys-
tems in factory automation applications and is speci-
fically designed to support the communication
standard IO-Link †.
The output drivers are push-pull stages, which in
tandem mode reach an RDSon of less than 3.3Ω at all
operational temperatures.
The configuration is stored in an on-chip EEPROM
and automatically loaded into the ZIOL2411’s control
register during power up. The ZIOL2411 also
provides status information, such as overload and
over-temperature conditions. An integrated SPI inter-
face supports access to configuration and status
registers.
The ZIOL2411 is fabricated in a powerful CMOS
mixed signal technology that allows supply voltages
up to 40V. The EEPROM read/write functionality is
guaranteed within the entire operating temperature
range in combination with a low-voltage core supply
of 3.3V.
Features
• Configurable output current limits 56mA to
410mA per channel
• Standard cable driver/ physical layer transceiver
for IO-Link (master and device)
• Slew-rate controlled drivers
• Wide range for configurable feature set, which is
automatically loaded after power-on reset
• IO-Link-specific WURQ‡ detection
• On chip registers and EEPROM for system
configuration and status information
• SPI interface for accessing on-chip registers and
EEPROM
• Digital interface: 3.3V output, 5V tolerant inputs
• IC temperature monitoring/diagnosis
• Over-current and over-temperature indication
Benefits
• Configurable feature set
• Nonvolatile storage of system configuration
• Excellent electromagnetic compatibility (EMC)
performance due to adjustable output slew rate
control
• Low RDSon of 3.3Ω in tandem mode
• Programmable limitation of driver output current
• EEPROM read/write functionality within entire
operating temperature range
• Space saving 4x4 mm² 24-pin QFN
Available Support
• Evaluation Kits
• Application Notes
Physical Characteristics
• Operation temperature: -40 to +85 °C
• Supply voltage 8.0 to 36.0 V
• RoHS-compliant QFN-24 package
ZIOL2411 Application Circuits
sensor ZIOL2411
SIO Traditional PLC
sensor ZIOL2411 IO-L ZIOL24x1
actuator ZIOL2411
sensor ZIOL2411
IO-L ZIOL24x1
IO-Link
PLC
(master)
IO-L ZIOL24x1
sensor ZIOL2411
* High voltage (maximum power supply / signal swing is 36 volt)
† IDT is a member of the IO-Link Consortium: www.io-link.com
‡ IO-Link device wake-up
© 2016 Integrated Device Technology, Inc.
1
January 28, 2016
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet ZIOL2411.PDF ] |
Número de pieza | Descripción | Fabricantes |
ZIOL2411 | IO-Link compliant HV Line Driver IC | ZMDI |
ZIOL2411 | IO-Link compliant HV Line Driver | IDT |
ZIOL2412 | IO-Link compliant HV Line Driver IC | ZMDI |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |