DataSheet.es    


PDF BlueNRG-MS Data sheet ( Hoja de datos )

Número de pieza BlueNRG-MS
Descripción Upgradable Bluetooth Low Energy network processor
Fabricantes STMicroelectronics 
Logotipo STMicroelectronics Logotipo



Hay una vista previa y un enlace de descarga de BlueNRG-MS (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! BlueNRG-MS Hoja de datos, Descripción, Manual

BlueNRG-MS
Upgradable Bluetooth® Low Energy network processor
Datasheet - production data
Features
Bluetooth specification v4.1 compliant
master and slave single-mode Bluetooth low
energy network processor
Embedded Bluetooth low energy protocol
stack: GAP, GATT, SM, L2CAP, LL, RF-
PHY
Bluetooth low energy profiles provided
separately
Operating supply voltage: from 1.7 to 3.6 V
8.2 mA maximum TX current (@0 dBm, 3.0
V)
Down to 1.7 µA current consumption with
active BLE stack
Integrated linear regulator and DC-DC step-
down converter
Up to +8 dBm available output power (at
antenna connector)
Excellent RF link budget (up to 96 dB)
Accurate RSSI to allow power control
Proprietary application controller interface
(ACI), SPI based, allows interfacing with an
external host application microcontroller
Full link controller and host security
High performance, ultra-low power Cortex-
M0 32-bit based architecture core
Upgradable BLE stack (stored in embedded
Flash memory, via SPI)
AES security co-processor
Low power modes
16 or 32 MHz crystal oscillator
12 MHz ring oscillator
32 kHz crystal oscillator
32 kHz ring oscillator
Battery voltage monitor
Compliant with the following radio frequency
regulations: ETSI EN 300 328, EN 300 440,
FCC CFR47 Part 15, ARIB STD-T66
Available in QFN32 (5 x 5 mm) and
WLCSP34 (2.66 x 2.56 mm) packages
Operating temperature range:
-40 °C to 85 °C
Applications
Watches
Fitness, wellness and sports
Consumer medical
Security/proximity
Remote control
Home and industrial automation
Assisted living
Mobile phone peripherals
PC peripherals
Table 1: Device summary
Order code
Package
BLUENRG-MSQTR
QFN32
(5 x 5 mm)
BLUENRG-MSCSP
WLCSP34
(2.66 x 2.56 mm)
Packing
Tape and
reel
Tape and
reel
February 2016
DocID027103 Rev 6
1/42
www.st.com

1 page




BlueNRG-MS pdf
BlueNRG-MS
Description
1 Description
The BlueNRG-MS is a very low power Bluetooth low energy (BLE) single-mode network
processor, compliant with Bluetooth specification v4.1. The BlueNRG-MS supports multiple
roles simultaneously, and can act at the same time as Bluetooth Smart sensor and hub
device.
The Bluetooth Low Energy stack runs on the embedded ARM Cortex-M0 core. The stack is
stored on the on-chip non-volatile Flash memory and can be easily upgraded via SPI. The
device comes pre-programmed with a production-ready stack image (whose version could
change at any time without notice). A different or more up-to-date stack image can be
downloaded from the ST web site and programmed on the device through the ST provided
software tools.
The BlueNRG-MS allows applications to meet of the tight advisable peak current
requirements imposed with the use of standard coin cell batteries. The maximum peak
current is only 10 mA at 1 dBm of output power. Ultra low-power sleep modes and very
short transition times between operating modes allow very low average current
consumption, resulting in longer battery life. The BlueNRG-MS offers the option of
interfacing with external microcontrollers using SPI transport layer.
DocID027103 Rev 6
5/42

5 Page





BlueNRG-MS arduino
BlueNRG-MS
Application circuits
4 Application circuits
The schematics below are purely indicative. For more detailed schematics, please refer to
the "Reference design" and "Layout guidelines" which are provided as separate
documents.
Figure 5: BlueNRG-MS application circuit: active DC-DC converter QFN32 package
DocID027103 Rev 6
11/42

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet BlueNRG-MS.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BlueNRG-MSUpgradable Bluetooth Low Energy network processorSTMicroelectronics
STMicroelectronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar