|
|
Número de pieza | XC6367 | |
Descripción | PWM/PFM Switchable Step-up DC/DC Controllers | |
Fabricantes | Torex Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de XC6367 (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
No Preview Available ! XC6367/XC6368 Series
PWM Controlled, PWM/PFM Switchable Step-up DC/DC Controllers
ETR0401_005
☆GreenOperation-Compatible
■GENERAL DESCRIPTION
The XC6367/XC6368 series are multi-functional step-up DC/DC controllers which provide high efficiency outputs by using an
externally connected transistor, coil, diode and capacitor.
Output voltage is selectable in 0.1V increments within a range of 1.5V ~ 6.5V (±2.5%). For output voltages outside this
range, we recommend FB version, which has a 1.0V internal reference voltage. Using the FB version, the required output
voltage can be set-up using 2 external resistors.
With a 300kHz oscillation frequency, the size of the external components can be reduced.
Control switches from PWM to PFM during light loads with the XC6368 (PWM/PFM switchable) and the series is highly
efficient from light loads to large output currents.
Soft start time of XC6367/ XC6368A, B, and E series is internally set to 10ms and XC6367/68C, D, and F series regulate
soft-start time by connecting resistors and capacitors externally.
During stand-by (CE pin "Low"), supply current is reduced to less than 0.5μA.
■APPLICATIONS
●E-book Readers / Electronic dictionaries
●Smart phones / Mobile phones
●Note PCs / Tablet PCs
●Digital audio equipments
●Multi-function power supplies
■FEATURES
Input Voltage Range : 0.9V ~ 10V
Operating Voltage Range : 2.0V ~ 10V
Output voltage Range : 1.5V ~ 6.5V (0.1V increments) (±2.5%)
Oscillation Frequency : 300kHz, 100kHz (±15%)
Custom products for 180kHz, 500kHz
Output Current
: More than 200mA (VIN=1.8V, VOUT=3.3V)
High Efficiency
Stand-by capability
Selection
: 84% (TYP.)
: ISTB=0.5μA (MAX.)
: Soft-start set-up external
Output voltage set-up internal (VOUT)
Output voltage set-up external (FB)
PWM/PFM Control (XC6368)
Package
: SOT-25
Environmentally Friendly : EU RoHS Compliant, Pb Free
■TYPICAL APPLICATION CIRCUIT ■ TYPICAL PERFORMANCE
CHARACTERISTICS
1/28
1 page ■ABSOLUTE MAXIMUM RATINGS
PARAMETER
VDD Pin Voltage
VOUT Pin Voltage
FB Pin Voltage
CE Pin Voltage
EXT Pin Voltage
EXT Pin Current
Power Dissipation
Operating Temperature Range
Storage Temperature Range
*Voltage is all ground standardized.
SYMBOL
VDD
VOUT
VFB
VCE
VEXT
IEXT
Pd
Topr
Tstg
RATINGS
-0.3 ~ +12.0
-0.3 ~ +12.0
-0.3 ~ +12.0
-0.3 ~ +12.0
-0.3 ~ VDD+0.3
±100
150
-30 ~ +80
-40 ~ +125
XC6367/XC6368
Series
Ta = 25℃
UNITS
V
V
V
V
V
mA
mW
℃
℃
■ELECTRICAL CHARACTERISTICS
XC6367A333MR, XC6368A333MR
PARAMETER
SYMBOL
Output Voltage
VOUT
Supply Voltage (* 1)
VDD
Maximum Input Voltage
VIN
Oscillation Start Voltage 1
VST1
Oscillation Start Voltage 2
VST2
Oscillation Hold Voltage
VHLD
Supply Current 1
IDD1
Supply Current 2
IDD2
Stand-by Current
ISTB
Oscillator Frequency
FOSC
Maximum Duty Ratio
MAXDTY
PFM Duty Ratio (* 3)
PFMDTY
CE "High" Voltage
VCEH
CE "Low" Voltage
VCEL
EXT "High" ON Resistance REXTH
EXT "Low" ON Resistance REXTL
Efficiency (* 2)
EFFI
Soft-Start Time
TSS
VOUT=3.3V, FOSC=300kHz, Ta=25℃
CONDITIONS
MIN. TYP. MAX. UNITS
3.218 3.300 3.383
V
2.0 - 10.0
V
10.0 - - V
Tr: 2SD1628, IOUT=1.0mA
VOUT=CE: Apply voltage
Tr: Use of a 2SX1628, IOUT=1.0mA
VOUT=CE=setting output voltage x 0.95
VOUT=CE=setting output voltage + 0.5V
VOUT=setting output voltage x 0.95, CE=0V
Same as IDD1
Same as IDD1
IOUT=0mA
VOUT=setting output voltage x0.95
VOUT=setting output voltage x0.95
Same as IDD1, VEXT=VOUT-0.4V
Same as IDD1, VEXT=0.4V
-
-
-
-
-
-
255
78
15
0.65
-
-
-
-
-
-
130
20
-
300
85
25
-
-
29
19
0.9
0.8
0.7
200
35
0.5
345
92
35
-
0.20
43
27
V
V
V
μA
μA
μA
kHz
%
%
V
V
Ω
Ω
- 84
-
%
5 10 20 msec
Conditions: Unless otherwise stated, connect VDD to VOUT; VIN=setting output voltage x 0.6, IOUT=130mA
NOTE:
* 1: When taking VDD from another power source please ensure that VDD = 2.0V or more.
Oscillation will occur with a value of VDD = 0.8V or more, but with a value of VDD = 2.0V or more,
output voltage and oscillation frequency will be stable.
* 2: EFFI = {[(output voltage) x (output current)]÷[(input voltage) x (input current)] x 100
* 3: Applies to the XC6368 series only (duty ratio when control changes to PFM).
5/28
5 Page ■TEST CIRCUITS
XC6367/XC6368
Series
11/28
11 Page |
Páginas | Total 28 Páginas | |
PDF Descargar | [ Datasheet XC6367.PDF ] |
Número de pieza | Descripción | Fabricantes |
XC6365 | PWM/PFM Switchable Step-Down DC/DC Controllers | TOREX |
XC6366 | PWM/PFM Switchable Step-Down DC/DC Controllers | TOREX |
XC6367 | PWM/PFM Switchable Step-up DC/DC Controllers | Torex Semiconductor |
XC6368 | PWM/PFM Switchable Step-up DC/DC Controllers | Torex Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |