DataSheet.es AD5172 Hoja de datos PDF

AD5172 Hoja de datos en formato PDF ( Datasheet )

AD5172 Función - Dual-Channel I2C Digital Potentiometers - Analog Devices

Número de pieza AD5172
Descripción Dual-Channel I2C Digital Potentiometers
Fabricantes Analog Devices 
Logotipo Analog Devices Logotipo
Vista previa
		

No Preview Available !

AD5172 Hoja de datos, Descripción, Manual
Data Sheet
256-Position, One-Time Programmable,
Dual-Channel, I2C Digital Potentiometers
AD5172/AD5173
FEATURES
2-channel, 256-position potentiometers
One-time programmable (OTP) set-and-forget resistance
setting provides a low cost alternative to EEMEM
Unlimited adjustments prior to OTP activation
OTP overwrite allows dynamic adjustments with user-
defined preset
End-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ
Compact 10-lead MSOP: 3 mm × 4.9 mm
Fast settling time: tS = 5 μs typical on power-up
Full read/write of wiper register
Power-on preset to midscale
Extra package address decode pins: AD0 and AD1 (AD5173 )
Single supply: 2.7 V to 5.5 V
Low temperature coefficient: 35 ppm/°C
Low power: IDD = 6 μA maximum
Wide operating temperature: −40°C to +125°C
FUNCTIONAL BLOCK DIAGRAMS
A1 W1 B1
A2 W2 B2
VDD
GND
FUSE
LINKS
12
RDAC
REGISTER 1
RDAC
REGISTER 2
SDA
SCL
/8
SERIAL INPUT
REGISTER
Figure 1. AD5172 Functional Block Diagram
W1 B1
W2 B2
APPLICATIONS
Systems calibration
Electronics level setting
Mechanical trimmers replacement in new designs
Permanent factory PCB setting
Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors
RF amplifier biasing
Automotive electronics adjustment
Gain control and offset adjustment
GENERAL DESCRIPTION
The AD5172/AD5173 are dual-channel, 256-position, one-time
programmable (OTP) digital potentiometers1 that employ fuse
link technology to achieve memory retention of resistance
settings. OTP is a cost-effective alternative to EEMEM for users
who do not need to program the digital potentiometer setting
in memory more than once. These devices perform the same
electronic adjustment function as mechanical potentiometers or
variable resistors but with enhanced resolution, solid-state reliabil-
ity, and superior low temperature coefficient performance.
The AD5172/AD5173 are programmed using a 2-wire, I2C®-
compatible digital interface. Unlimited adjustments are allowed
VDD
GND
FUSE
LINKS
12
RDAC
REGISTER 1
RDAC
REGISTER 2
AD0 ADDRESS
/AD1
DECODE
8
SDA
SCL
SERIAL INPUT
REGISTER
Figure 2. AD5173 Functional Block Diagram
before permanently setting the resistance value. During OTP
activation, a permanent blow fuse command freezes the wiper
position (analogous to placing epoxy on a mechanical trimmer).
Unlike traditional OTP digital potentiometers, the AD5172/
AD5173 have a unique temporary OTP overwrite feature that
allows for new adjustments even after a fuse is blown. However,
the OTP setting is restored during subsequent power-up condi-
tions. This allows users to treat these digital potentiometers as
volatile potentiometers with a programmable preset.
1 The terms digital potentiometer, VR, and RDAC are used interchangeably.
Rev. I
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2003–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com





Páginas Total 28 Páginas
PDF Descargar[ AD5172.PDF ]

Enlace url


AD5172 Datasheet ( Hojas de datos )


Hoja de datos destacado

Número de piezaDescripciónFabricantes
AD5170I2C Digital PotentiometerAnalog Devices
Analog Devices
AD517164-Position OTP Digital PotentiometerAnalog Devices
Analog Devices
AD5172Dual-Channel I2C Digital PotentiometersAnalog Devices
Analog Devices
AD5173Dual-Channel I2C Digital PotentiometersAnalog Devices
Analog Devices
AD5174Digital Rheostat With SPI Interface And 50-TP MemoryAnalog Devices
Analog Devices
AD5175Digital Rheostat with I2C Interface and 50-TP MemoryAnalog Devices
Analog Devices



Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z


www.DataSheet.es    |   2017   |  Contacto  |  nuevas actualizaciones