|
|
PDF FMCA-22065 Data sheet ( Hoja de datos )
| Número de pieza | FMCA-22065 | |
| Descripción | SiC Schottky Diode | |
| Fabricantes | Sanken | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FMCA-22065 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
VRSM = 650 V, IF(AV) = 20 A
SiC Schottky Diode
FMCA-22065
Features
FMCA-22065 is a SiC Schottky Diode of 650 V /
20 A and has the characteristics of low reverse leakage
current at high temperature and high speed switching.
These characteristics realize the improving of power
supply efficiency, and the high frequency system.
● VRSM ---------------------------------------------------- 650 V
● IF(AV)------------------------------------------------------- 20 A
● VF (25 °C)----------------------------------------------- 1.5 V
Applications
The high speed switching applications as follows:
● PFC circuit
● Motor drive circuit
● Inverter circuit
Package
TO220F-3L
(1)
(1)(2)(3)
(2)
(1) Anode
(2) Cathode
(3) Anode
(3)
Not to scale
Absolute Maximum Ratings
Unless otherwise specified, TA is 25 °C
Parameter
Peak Repetitive Reverse Voltage
Repetitive Reverse Voltage
Average Forward Current
Surge Forward Current
Junction Temperature
Storage Temperature
Symbol
VRSM
VRM
IF(AV)
IFSM
Tj
Tstg
Rating
650
600
20
40
−40 to 175
−40 to 175
Electrical Characteristics
Unless otherwise specified, TA is 25 °C
Parameter
Symbol
Test Conditions
Forward Voltage Drop
TA = 25 °C, IF = 20 A
VF
TA = 100 °C, IF = 20 A
Reverse Leakage Current
Reverse Leakage Current
Under High Temperature
IR
H･IR
VR = VRM
VR = VRM, Tj = 150 °C
Thermal Resistance*
Rth(j-L)
* Rth(j-L) is thermal resistance between junction and lead.
Unit Notes
V
V
A
A
10 ms
Half sinewave, one shot
°C
°C
Min. Typ. Max. Unit
−
1.5 1.75
V
− 1.6 −
V
−
15 200
µA
−
70 500
µA
− − 2.5 °C/W
FMCA-22065-DSJ Rev.1.0
Sept. 08, 2015
SANKEN ELECTRIC CO.,LTD.
http://www.sanken-ele.co.jp
1
1 page  
FMCA-22065
For tightening screws, if a tightening tool (such as a driver) hits the products, the package may crack, and internal
stress fractures may occur, which shorten the lifetime of the electrical elements and can cause catastrophic failure.
Tightening with an air driver makes a substantial impact. In addition, a screw torque higher than the set torque can
be applied and the package may be damaged. Therefore, an electric driver is recommended.
When the package is tightened at two or more places, first pre-tighten with a lower torque at all places, then tighten
with the specified torque. When using a power driver, torque control is mandatory.
Please pay special attention about the slack of the press mold. In case that the hole diameter of the heatsink is less
than 4 mm, it may cause the resin crack at tightening.
Soldering
When soldering the products, please be sure to minimize the working time, within the following limits:
• 260 ± 5 °C 10 ± 1 s (Flow, 2 times)
• 380 ± 10 °C 3.5 ± 0.5 s (Soldering iron, 1 time)
IMPORTANT NOTES
The contents in this document are subject to changes, for improvement and other purposes, without notice. Make
sure that this is the latest revision of the document before use.
Application examples, operation examples and recommended examples described in this document are quoted for
the sole purpose of reference for the use of the products herein and Sanken can assume no responsibility for any
infringement of industrial property rights, intellectual property rights, life, body, property or any other rights of
Sanken or any third party which may result from its use.
Unless otherwise agreed in writing by Sanken, Sanken makes no warranties of any kind, whether express or
implied, as to the products, including product merchantability, and fitness for a particular purpose and special
environment, and the information, including its accuracy, usefulness, and reliability, included in this document.
Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and
defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at
their own risk, preventative measures including safety design of the equipment or systems against any possible
injury, death, fires or damages to the society due to device failure or malfunction.
Sanken products listed in this document are designed and intended for the use as components in general purpose
electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring
equipment, etc.).
When considering the use of Sanken products in the applications where higher reliability is required (transportation
equipment and its control systems, traffic signal control systems or equipment, fire/crime alarm systems, various
safety devices, etc.), and whenever long life expectancy is required even in general purpose electronic equipment
or apparatus, please contact your nearest Sanken sales representative to discuss, prior to the use of the products
herein.
The use of Sanken products without the written consent of Sanken in the applications where extremely high
reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.) is strictly
prohibited.
When using the products specified herein by either (i) combining other products or materials therewith or (ii)
physically, chemically or otherwise processing or treating the products, please duly consider all possible risks that
may result from all such uses in advance and proceed therewith at your own responsibility.
Anti radioactive ray design is not considered for the products listed herein.
Sanken assumes no responsibility for any troubles, such as dropping products caused during transportation out of
Sanken’s distribution network.
The contents in this document must not be transcribed or copied without Sanken’s written consent.
FMCA-22065-DSJ Rev.1.0
Sept. 08, 2015
SANKEN ELECTRIC CO.,LTD.
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet FMCA-22065.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FMCA-22065 | SiC Schottky Diode | Sanken |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |