DataSheet.es    


PDF 5P83905 Data sheet ( Hoja de datos )

Número de pieza 5P83905
Descripción High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout Buffer
Fabricantes IDT 
Logotipo IDT Logotipo



Hay una vista previa y un enlace de descarga de 5P83905 (archivo pdf) en la parte inferior de esta página.


Total 18 Páginas

No Preview Available ! 5P83905 Hoja de datos, Descripción, Manual

High-Performance 1.8V/2.5V/3.3V Crystal
Input to LVCMOS Clock Fanout Buffer with OE
5P8390x
DATASHEET
Description
The 5P8390x is a high performance, 1-to-4/6/8 crystal input to
LVCMOS fanout buffer with output enable pins. This device
accepts a fundamental mode crystal from 10MHz to 40MHz
and outputs LVCMOS clocks with best-in-class phase noise
performance.
The 5P8390x family (5P83904, 5P83905, and 5P83908)
features a synchronous glitch-free Output Enable function to
eliminate any intermediate incorrect output clock cycles when
enabling or disabling outputs. It comes in standard TSSOP
packages or small QFN packages and can operate from 1.8V
to 3.3V supplies.
5P83904 Block Diagram
Features
4/6/8 copies of LVCMOS output clocks with best-in-class
phase noise performance
Phase Noise:
Offset Noise Power (3.3V)
100Hz: -131 dBc/Hz
1KHz: -145 dBc/Hz
10KHz: -154 dBc/Hz
100KHz: -161 dBc/Hz
Operating power supply modes:
Full 3.3V, 2.5V, 1.8V
Mixed 3.3V core/2.5V output operating supply
Mixed 3.3V core/1.8V output operating supply
Mixed 2.5V core/1.8V output operating supply
Crystal Oscillator Interface
Synchronous Output Enable
Packaged in 16-, 20-pin TSSOP and QFN packages (Pb
free, fully RoHS compliant)
Extended (-40°C to +105°C) temperature range
XTAL_IN
XTAL_OUT
ENABLE1
OSC
SYNC1
ENABLE2
SYNC2
CLK0
CLK1
CLK2
CLK3
5P8390x OCTOBER 5, 2016
1 ©2016 Integrated Device Technology, Inc.

1 page




5P83905 pdf
5P8390x DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 5P8390x. These ratings, which are standard values
for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions
above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating
conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended
operating temperature range.
Item
Supply Voltage, VDD
Output Enable and All Outputs
CLKIN
Ambient Operating Temperature (extended)
Storage Temperature
Junction Temperature
Soldering Temperature
Rating
3.465V
-0.4 V to VDD+0.5 V
-0.4 V to 3.465V
-40 to +105°C
-65 to +150°C
125C
260C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature (extended)
Power Supply Voltage (measured in respect to GND)
Min.
-40
+1.71
Typ.
Max.
+105
+3.465
Units
C
V
DC Electrical Characteristics
(VDD = 1.8V, 2.5V, 3.3V)
VDD=1.8V ±5% , Ambient temperature -40° to +105°C, unless stated otherwise
Parameter
Input High Voltage
Input Low Voltage
Output High Voltage
Output Low Voltage
Nominal Output Impedance
Operating Supply Current
5P83904
5P83905
5P83908
Symbol
VIH
VIL
VOH
VOL
ZO
Conditions
XTAL_IN, ENABLE1/2 pins
XTAL_IN, ENABLE1/2 pins
IOH = -4 mA
IOL = 4 mA
Min.
0.7xVDD
1.65
0.03
Outputs On, 25MHz with No Load
IDD Outputs On, 25MHz with No Load
Outputs On, 25MHz with No Load
Typ.
14
8.9
9.0
9.2
Max.
0.3xVDD
1.85
0.05
Units
V
V
V
V
mA
OCTOBER 5, 2016
5 HIGH-PERFORMANCE 1.8V/2.5V/3.3V CRYSTAL INPUT TO LVCMOS CLOCK FANOUT BUFFER WITH OE

5 Page





5P83905 arduino
5P8390x DATASHEET
Package Outline and Package Dimensions, cont. (16-pin QFN, 2.5mm x 2.5mm Body, 0.4mm pitch)
OCTOBER 5, 2016
11 HIGH-PERFORMANCE 1.8V/2.5V/3.3V CRYSTAL INPUT TO LVCMOS CLOCK FANOUT BUFFER WITH OE

11 Page







PáginasTotal 18 Páginas
PDF Descargar[ Datasheet 5P83905.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
5P83904High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout BufferIDT
IDT
5P83905High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout BufferIDT
IDT
5P83908High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout BufferIDT
IDT

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar