DataSheet.es    


PDF DS28E15 Data sheet ( Hoja de datos )

Número de pieza DS28E15
Descripción DeepCover Secure Authenticator
Fabricantes Maxim Integrated 
Logotipo Maxim Integrated Logotipo



Hay una vista previa y un enlace de descarga de DS28E15 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! DS28E15 Hoja de datos, Descripción, Manual

ABRIDGED DATA SHEET
DS28E15
DeepCover Secure Authenticator with
1-Wire SHA-256 and 512-Bit User EEPROM
General Description
DeepCover™ embedded security solutions cloak sensi-
tive data under multiple layers of advanced physical
security to provide the most secure key storage possible.
The DeepCover Secure Authenticator (DS28E15) com-
bines crypto-strong bidirectional secure challenge-and-
response authentication functionality with an imple-
mentation based on the FIPS 180-3-specified Secure
Hash Algorithm (SHA-256). A 512-bit user-program-
mable EEPROM array provides nonvolatile storage of
application data. Additional protected memory holds a
read-protected secret for SHA-256 operations and set-
tings for memory protection control. Each device has
its own guaranteed unique 64-bit ROM identification
number (ROM ID) that is factory programmed into the
chip. This unique ROM ID is used as a fundamental input
parameter for cryptographic operations and also serves
as an electronic serial number within the application. A
bidirectional security model enables two-way authen-
tication between a host system and slave-embedded
DS28E15. Slave-to-host authentication is used by a host
system to securely validate that an attached or embed-
ded DS28E15 is authentic. Host-to-slave authentication is
used to protect DS28E15 user memory from being modi-
fied by a unauthentic host. The DS28E15 communicates
over the single-contact 1-WireM bus at overdrive speed.
The communication follows the 1-Wire protocol with the
ROM ID acting as node address in the case of a multi-
device 1-Wire network.
Applications
Authentication of Consumables
Secure Feature Control
Ordering Information appears at end of data sheet.
Benefits and Features
● 512-Bit EEPROM with SHA-256 Authentication for
Reads and Writes
• Symmetric-Key-Based Bidirectional Secure
Authentication Model Based on SHA-256
• Strong Authentication with a High-Bit-Count User
Programmable Secret and Input Challenge
• 512 Bits of User EEPROM Partitioned Into Two
Pages of 256 Bits
• User-Programmable and Irreversible EEPROM
Protection Modes Including Authentication, Write
and Read Protect, and OTP/EPROM Emulation
Unique Factory-Programmed, 64-Bit Identification
Number
● Minimalist 1-Wire Interface Lowers Cost and
Interface Complexity
• Reduces Control, Address, Data, Power, and
Programming Signals to a Single Data Pin
• ±8kV HBM ESD Protection (typ)
• 2-Pin SFN, 6-Pin TDFN-EP, and 6-Pin TSOC
Packages
• Operating Range: 3.3V ±10%, -40°C to +85°C
Typical Application Circuit
3.3V
(I2C PORT)
µC
RP = 1.1k
MAXIMUM I2C BUS CAPACITANCE 320pF
RP
SDA
SCL
VCC
DS2465
SLPZ IO 1-Wire LINE
DS28E15
DeepCover is a trademark and 1-Wire is a registered trademark of Maxim Integrated Products, Inc.
219-0018; Rev 3; 3/15

1 page




DS28E15 pdf
DS28E15
DeepCover Secure Authenticator with
1-Wire SHA-256 and 512-Bit User EEPROM
Note to readers: This document is an abridged version of the full data sheet. Additional device infor-
mation is available only in the full version of the data sheet. To request the full data sheet, go to
www.maximintegrated.com/DS28E15 and click on Request Full Data Sheet.
Ordering Information
PART
DS28E15G+
DS28E15G+T
DS28E15Q+T
DS28E15P+
DS28E15P+T
TEMP RANGE
-40NC to +85NC
-40NC to +85NC
-40NC to +85NC
-40NC to +85NC
-40NC to +85NC
PIN-PACKAGE
2 SFN
2 SFN (2.5k pcs)
6 TDFN-EP*
(2.5k pcs)
6 TSOC
6 TSOC (4k pcs)
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.
Package Information
For the latest package outline information and land patterns (foot-
prints), go to www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
2 SFN
6 TDFN-EP
6 TSOC
PACKAGE
CODE
T23A6N+1
T633+2
D6+1
OUTLINE
NO.
21-0575
21-0137
21-0382
LAND
PATTERN NO.
90-0058
90-0321
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits)
shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. ©  2015 Maxim Integrated Products, Inc. 42

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet DS28E15.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DS28E101-Wire SHA-1 AuthenticatorMaxim Integrated Products
Maxim Integrated Products
DS28E15DeepCover Secure AuthenticatorMaxim Integrated
Maxim Integrated
DS28E171-Wire-to-I2C Master BridgeMaxim Integrated
Maxim Integrated

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar