DataSheet.es    

PDF 2016L075 Datasheet ( Hoja de datos )

Número de pieza 2016L075
Descripción Resettable PTC
Fabricantes Littelfuse 
Logotipo Littelfuse Logotipo

Total 5 Páginas
		
2016L075 Hoja de datos, Descripción, Manual
POLY-FUSE® Resettable PTCs
Surface Mount > 2016L Series
2016L Series
RoHS
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E183209
R50119118
Description
The 2016L Series PTC provides surface mount overcurrent
protection for low voltage (≤60V) applications where
resettable protection is desired.
Features
• RoHS compliant, lead-free
and halogen-free
• Fast response to fault
currents
• High voltage
• Low-profile
Applications
• IEEE 1394 port protection
• P owered ethernet port
protection (IEEE 802.3 af)
• Automotive electronic
control module protection
• Low voltage telecom
equipment protection
Electrical Characteristics
Part Number
Marking
I hold
(A)
I trip
V max
(A) (Vdc)
Maximum Time
I max
(A)
P d(Wty)p.
To Trip
Current Time
(A) (Sec.)
Resistance
R min
(Ω)
R 1max
(Ω)
Agency
Approvals
2016L030
LF030 0.30 0.60
60
20 1.40
1.5
3.0
0.500 2.300
X
X
2016L050
LF050 0.55 1.10
60
20 1.40
2.5
5.0 0.200 1.000 X
X
2016L075/60 LF075-60 0.75 1.50
60
20 1.40
8.0
0.5
0.130 0.900
X
X
2016L100
LF100 1.10 2.20
15
40 1.40
8.0
0.5
0.100 0.400
X
X
2016L100/33 LF100-33 1.10 2.20
33
40 1.40
8.0
0.5
0.100 0.400
X
X
2016L150
LF150 1.50 3.00
15
40 1.40
8.0
1.0
0.070 0.180
X
X
2016L150/33 LF150-33 1.50 3.00
33
40 2.0 8.00
1.00 0.070 0.180
2016L200
LF200 2.00 4.20
6
40 1.40
8.0
3.0
0.048 0.100
X
X
2016L260/24 LF260-24 2.60 5.00
24
40 1.6 8.00
5.00 0.025 0.075
2016L300/16 LF0300 3.00 5.00
16
40
1.6
8.00
10.00
0.015 0.048
2016L500
LF500 5.00 10.00
6
100 2.0 25.00
2.00 0.005 0.025
X
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state.
R 1max = M aximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec.
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
* Agency Approval is Pending
WARNING
• Users shall independently assess the suitability of these devices for each of their applications
• Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
• These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such
conditions are expected to be repetitive or prolonged in duration
• Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
• These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
• Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device.
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 08/22/16

1 page

2016L075 pdf
POLY-FUSE® Resettable PTCs
Surface Mount > 2016L Series
Tape and Reel Specifications
TAPE SPECIFICATIONS: EIA-481-1 (mm)
2016L030
2016L100/33
2016L150
2016L100
2016L150/33
2016L050
2016L200
2016L260/24
2016L075/60
2016L300/16
2016L500
W
F
E1
D0
D1
P0
P1
P2
A0
B0
T
KO
Leader Min.
Trailer Min.
12.0+/- 0.30
5.50+/- 0.05
1.75+/- 0.10
1.55+/- 0.05
1.50 (MIN)
4.0+/- 0.10
8.0+/- 0.10
2.0+/- 0.05
4.40+/- 0.10
5.50+/- 0.10
0.25+/- 0.10
0.80+/- 0.10
390
160
12.0+/- 0.30
5.50+/- 0.05
1.75+/- 0.10
1.55+/- 0.05
1.50 (MIN)
4.0+/- 0.10
8.0+/- 0.10
2.0+/- 0.05
4.48+/- 0.10
5.40+/- 0.10
0.25+/- 0.10
1.36+/- 0.10
390
160
12.0+/- 0.30
5.50+/- 0.05
1.75+/- 0.10
1.55+/- 0.05
1.50 (MIN)
4.0+/- 0.10
8.0+/- 0.10
2.0+/- 0.05
4.45+/- 0.10
5.48+/- 0.10
0.25+/- 0.10
1.86+/- 0.10
390
160
Tape and Reel Diagram
REEL DIMENSIONS:
EIA-481-1 (mm)
C Ø178.0+/-1.0
D Ø60.2+/-0.5
H 16.0+/- 0.5
W 13.2+/- 1.5
D0
P1 P0
P2 E1
F
W
T D1
D1 K0 B0
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 08/22/16
H
DC
W

5 Page



PáginasTotal 5 Páginas
PDF Descargar[ 2016L075.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
2016L075Resettable PTCLittelfuse
Littelfuse

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar