|
|
Número de pieza | AH101-G | |
Descripción | High Linearity Amplifier | |
Fabricantes | TriQuint Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AH101-G (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! Applications
• Mobile Infrastructure
• CATV / DBS
• Defense / Homeland Security
Product Features
• 50 – 1500 MHz
• +47 dBm Output IP3
• 13.5 dB Gain
• +26.5 dBm P1dB
• MTTF > 1000 Years
• Internally Matched
• Single +9 V Supply
• Lead-free/RoHS-compliant SOT-89 Package
AH101-G
Medium Power, High Linearity Amplifier
AH101
SOT-89 Package
Functional Block Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
General Description
The AH101-G is a medium power gain block that offers
excellent dynamic range in a low-cost surface mount
package. The combination of a single supply voltage
and an internally matched device makes it ideal for both
narrow and broadband applications. Only dc blocking
and bypass capacitors as well as an RF choke are
required for operation.
Superior thermal design allows the product to achieve
+46 dBm IP3 performance at a mounting temperature of
+85°C with an associated MTTF of greater than 1000
years.
This broadband amplifier uses a high reliability GaAs
MESFET technology and is targeted for applications
where high linearity is required. The AH101-G is
available in the environmentally-friendly green/RoHS-
compliant SOT-89 package.
Pin Configuration
Pin No.
1
3
2, 4
Label
RF In
RF Out
GND
Not Recommended for
New Designs
Recommended Replacement Part:
TQP7M9102
Datasheet: Rev B 08-12-13
© 2013 TriQuint
Ordering Information
Part No.
AH101-G
Description
Med. Power High Linearity Amplifier
Standard T/R size = 1000 pieces on a 7” reel
- 1 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
1 page Pin Configuration and Description
AH101-G
Medium Power, High Linearity Amplifier
GND
4
1
RF IN
2
GND
3
RF OUT
Pin No.
1
3
2, 4
Label
RF In
RF Out
GND
Description
RF input, matched to 50 ohms. External DC Block is required.
RF output / DC supply, matched to 50 ohms. External DC Block, bias choke required.
Backside Paddle. Multiple vias should be employed to minimize inductance and thermal
resistance; see PCB mounting pattern in Mechanical Information section.
Evaluation Board PCB Information
TriQuint PCB 1075825 Material and Stack-up
0.014"
0.062" ± 0.006"
Finished Board
Thickness
0.014"
Nelco N-4000-13
1 oz. Cu top layer
1 oz. Cu inner layer
Nelco N-4000-13
εr=3.9 typ.
Nelco N-4000-13
1 oz. Cu inner layer
1 oz. Cu bottom layer
50 ohm line dimensions: width = 0.029”, spacing = 0.035”
Datasheet: Rev B 08-12-13
© 2013 TriQuint
- 5 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet AH101-G.PDF ] |
Número de pieza | Descripción | Fabricantes |
AH101-G | High Linearity Amplifier | TriQuint Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |