DataSheet.es    


PDF IQCM-100 Data sheet ( Hoja de datos )

Número de pieza IQCM-100
Descripción OCXO
Fabricantes IQD 
Logotipo IQD Logotipo



Hay una vista previa y un enlace de descarga de IQCM-100 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! IQCM-100 Hoja de datos, Descripción, Manual

ISSUE 1; February 2016
Description
A GNSS disciplined OCXO incorporating sync to a 1PPS input
and 1PPS output. Compatible with GPS, GLONASS, BEIDOU
and GALILEO.
Holdover stability up to 1.5µs over 24hours, achieved using an
adaptive algorithm.
Internal parameters of the algorithm, including maintenance
alarms and message are available to the user via serial port.
Frequency stability better than 1E-12
Application Information (Reference Drawing):
Connect the 1PPS output of your GPS system to the
IQCM-100. A MCU can be used to monitor the working state of
the IQCM-100.
Working States (Reference Drawing):
Run1: Fast track. Adjust the OCXO 10MHz output frequency
quickly to track the 1PPS to 10MHz with 1PPS reference.
Run2: Slow track. Adjust the OCXO 10MHz output frequency
slowly when phase error is in the defined range.
Holdover: No 1PPS input present; an algorithm enables
adaptive modelling of the frequency stability of an OCXO with
reference to the GPS timing signal.
Free Run: Clock module powered up with no 1PPS input.
Note1: The IQCM-100 should be left powered and running for 7
days minimum before operation to allow for the OCXO's
internal drift to stabilise.
Note2: The adaptive module algorithm can be built after two
days operation with good GPS signal, however this data will be
lost at power down.
Note3: When State input (Pin 8) is set low the IQCM-100 will
operate in Holdover mode regardless of the 1PPS signal
condition.
Output Data Word Example:
$PDP,00,0,F,1,-3095,32768.0000,32768.0000,000,000,00000.
0000,00000.0000,00000.0000,00000.0000,3-23,+000.0000,-00
00,www.iqdfp.com,1.1,2011-05-16*55
(See table for full description)
OCXO Specification
IQCM-100
Outline (mm)
Workflow Diagram
Sales Office Contact Details:
UK: +44 (0)1460 270200
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 26 Apr 16 10:46 using Model Data Sheet V1.2550
Web: www.iqdfrequencyproducts.com
Page 1 of 6

1 page




IQCM-100 pdf
Functional Block Diagram
OCXO Specification
IQCM-100
Application Information
Sales Office Contact Details:
UK: +44 (0)1460 270200
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 26 Apr 16 10:46 using Model Data Sheet V1.2550
Web: www.iqdfrequencyproducts.com
Page 5 of 6

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet IQCM-100.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IQCM-100OCXOIQD
IQD

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar