DataSheet.es    


PDF 2SC2412KFRA Data sheet ( Hoja de datos )

Número de pieza 2SC2412KFRA
Descripción General purpose transistor
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de 2SC2412KFRA (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! 2SC2412KFRA Hoja de datos, Descripción, Manual

AEC-Q101 Qualified
General purpose transistor (50V, 0.15A)
2SC2412KF/R2ASC/ 420S8C14/028S1FCR4A61/72/S2CS4C651675F8RA/ /2SC5658FHA
Features
1. Low Cob. Cob=2.0pF (Typ.)Cob=2.0pF (Typ.)
2. Complements the 2SAA11003377AAKKFR/A2S/ 2AS1A517567A6A/FRA
22SSAA11777744FHRA/ /22SSAA220029F. HA
Dimensions (Unit : mm)
2S2CS2C421421K2FKRA
2S2CS4C048018F1RA
Structure
Epitaxial planar type
NPN silicon transistor
1.25
1.6 2.1
2.8
0.3Min.
Each lead has same dimensions
ROHM : SMT3
EIAJ : SC-59
JEDEC : SOT-346
(1) Emitter
(2) Base
(3) Collector
Abbreviated symbol: B*
2SC24S6C174F6R17A
(1)
(3) (2)
0.8
1.6
0.1Min.
0.1Min.
Each lead has same dimensions
ROHM : UMT3
EIAJ : SC-70
JEDEC : SOT-323
(1) Emitter
(2) Base
(3) Collector
Abbreviated symbol: B*
2S2SCC5655685F8HA
1.2
0.2 0.8 0.2
(2)
(3)
(1)
0.15Max.
Absolute maximum (Ta=25C)
Parameter
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Collector power 22SSCC22441122KKF, 2RSAC, 420S8C14081FRA
dissipation
22SSCC44661177F, 2RSAC, 526S5C85658FHA
Junction temperature
Storage temperature
Symbol
VCBO
VCEO
VEBO
IC
PC
Tj
Tstg
ROHM : EMT3
EIAJ : SC-75A
JEDEC : SOT-416
(1) Emitter
(2) Base
(3) Collector
Abbreviated symbol: B*
* Denotes hFE
Limits
60
50
7
0.15
0.2
0.15
150
55 to +150
Unit
V
V
V
A
W
°C
°C
ROHM : VMT3
(1) Base
(2) Emitter
(3) Collector
Abbreviated symbol: B*
Electrical characteristics (Ta=25C)
Parameter
Symbol
Collector-base breakdown voltage BVCBO
Collector-emitter breakdown voltage BVCEO
Emitter-base breakdown voltage
BVEBO
Collector cutoff current
ICBO
Emitter cutoff current
IEBO
DC current transfer ratio
hFE
Collector-emitter saturation voltage VCE(sat)
Transition frequency
Output capacitance
fT
Cob
Min.
60
50
7
120
Typ.
180
2
Max.
0.1
0.1
390
0.4
3.5
Unit
V
V
V
μA
μA
V
MHz
pF
Conditions
IC=50μA
IC=1mA
IE=50μA
VCB=60V
VEB=7V
VCE=6V, IC=1mA
IC/IB=50mA/5mA
VCE=12V, IE=2mA, f=100MHz
VCE=12V, IE=0A, f=1MHz
www.rohm.com
c 2012 ROHM Co., Ltd. All rights reserved.
1/3
2012.01 - Rev.D

1 page




2SC2412KFRA pdf
Datasheet
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet 2SC2412KFRA.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
2SC2412KFRAGeneral purpose transistorROHM Semiconductor
ROHM Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar