|
|
Número de pieza | RN2483 | |
Descripción | Transceiver Module | |
Fabricantes | Microchip | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RN2483 (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! RN2483
Low-Power Long Range LoRa® Technology
Transceiver Module
General Features
• On-board LoRaWAN™ protocol stack
• ASCII command interface over UART
• Compact form factor: 17.8 x 26.7 x 3.34 mm
• Castellated SMT pads for easy and reliable PCB
mounting
• Environmentally friendly, RoHS compliant
• European R&TTE Directive Assessed Radio
Module
• Device Firmware Upgrade (DFU) over UART, see
“RN2483 LoRa® Technology Module Command
Reference User’s Guide” (DS40001784)
Operational
• Single operating voltage: 2.1V to 3.6V (3.3V
typical)
• Temperature range: -40°C to +85°C
• Low-power consumption
• Programmable RF Communication Bit Rate up to
300 kbps with FSK modulation, 10937 bps with
LoRa® Technology modulation
• Integrated MCU, Crystal, EUI-64 Node Identity
Serial EEPROM, Radio Transceiver with Analog
Front End, Matching Circuitry
• 14 GPIOs for control and status
RF/Analog Features
• Low-Power Long Range Transceiver operating in
the 433 MHz and 868 MHz frequency bands
• High Receiver Sensitivity: down to -146 dBm
• TX Power: adjustable up to +14 dBm high
efficiency PA
• FSK, GFSK, and LoRa Technology modulation
• IIP3 = -11 dBm
• Up to 15 km coverage at suburban and up to 5 km
coverage at urban area
Description
Microchip’s RN2483 Low-Power Long Range LoRa
Technology Transceiver module provides an easy to
use, low-power solution for long range wireless data
transmission. The advanced command interface offers
rapid time to market.
The RN2483 module complies with the LoRaWAN
Class A protocol specifications. It integrates RF, a
baseband controller, command Application
Programming Interface (API) processor, making it a
complete long range Solution.
The RN2483 module is suitable for simple long range
sensor applications with external host MCU.
Applications
• Automated Meter Reading
• Home and Building Automation
• Wireless Alarm and Security Systems
• Industrial Monitoring and Control
• Machine to Machine (M2M)
• Internet of Things (IoT)
2015 Microchip Technology Inc.
DS50002346B-page 1
1 page RN2483
TABLE 1-1: PIN DESCRIPTION (CONTINUED)
Pin Name
Type
Description
44 GPIO7
Input/Output
General purpose I/O pin
45 GPIO8
Input/Output
General purpose I/O pin
46 GPIO9
Input/Output
General purpose I/O pin
47 GND
Power
Ground supply terminal
Note 1: Optional handshake lines are supported in future firmware releases.
2015 Microchip Technology Inc.
DS50002346B-page 5
5 Page 5.2 APPLICATION SCHEMATIC
Figure 5-3 shows the schematic for the RN2483 PICtail™/PICtail Plus Daughter Board.
FIGURE 5-3:
PICtail™/PICtail PLUS DAUGHTER BOARD SCHEMATIC
Note: Shaded components are not populated by default.
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet RN2483.PDF ] |
Número de pieza | Descripción | Fabricantes |
RN2483 | Transceiver Module | Microchip |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |