|
|
Número de pieza | PE43711 | |
Descripción | RF Digital Step Attenuator | |
Fabricantes | Peregrine Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PE43711 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! PE43711
Product Specification
UltraCMOS® RF Digital Step Attenuator, 9 kHz–6 GHz
Features
• Flexible attenuation steps of 0.25 dB, 0.5 dB and
1 dB up to 31.75 dB
• Glitch-less attenuation state transitions
• Monotonicity: 0.25 dB up to 4GHz, 0.5 dB up to
5 GHz and 1 dB up to 6 GHz
• Extended +105 °C operating temperature
• Parallel and Serial programming interfaces
• Packaging—24-lead 4 × 4 mm QFN
Applications
• 3G/4G wireless infrastructure
• Land mobile radio (LMR) system
• Point-to-point communication system
Figure 1 • PE43711 Functional Diagram
Switched Attenuator Array
RF
Input
Parallel
Control
×7
Serial In
CLK
Control Logic Interface
LE
RF
Output
P/S
Product Description
The PE43711 is a 50Ω, HaRP™ technology-enhanced, 7-bit RF digital step attenuator (DSA) that supports a
broad frequency range from 9 kHz to 6 GHz. It features glitch-less attenuation state transitions and supports
1.8V control voltage and an extended operating temperature range to +105 °C, making this device ideal for
many broadband wireless applications.
The PE43711 is a pin-compatible upgraded version of the PE43502, PE43503, PE43602 and PE43702. An
integrated digital control interface supports both Serial and Parallel programming of the attenuation, including
the capability to program an initial attenuation state at power-up.
The PE43711 covers a 31.75 dB attenuation range in 0.25 dB, 0.5 dB and 1 dB steps. It is capable of
maintaining 0.25 dB monotonicity through 4 GHz, 0.5 dB monotonicity through 5 GHz and 1 dB monotonicity
through 6 GHz. In addition, no external blocking capacitors are required if 0 VDC is present on the RF ports.
The PE43711 is manufactured on Peregrine’s UltraCMOS® process, a patented variation of silicon-on-insulator
(SOI) technology on a sapphire substrate.
©2014-2015, Peregrine Semiconductor Corporation. All rights reserved. • Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121
Product Specification
www.psemi.com
DOC-44414-2 – (3/2015)
1 page PE43711
UltraCMOS® RF Digital Step Attenuator
Table 3 • PE43711 Electrical Specifications (Cont.)
Parameter
Condition
Frequency Min Typ
Max
Relative phase
All states
9 kHz–4 GHz
4–6 GHz
31
48
Input 0.1dB compression
point(*)
48 MHz–6 GHz
31
Input IP3
Two tones at +18 dBm, 20 MHz
spacing
4 GHz
6 GHz
57
56
RF Trise/Tfall
10%/90% RF
200
Settling time
RF settled to within 0.05 dB of final
value
1.6
Switching time
50% CTRL to 90% or 10% RF
275
Attenuation transient
(envelope)
2 GHz
0.3
Note: * The input 0.1dB compression point is a linearity figure of merit. Refer to Table 2 for the operating RF input power (50Ω).
Unit
deg
deg
dBm
dBm
dBm
ns
µs
ns
dB
DOC-44414-2 – (3/2015)
www.psemi.com
Page 5
5 Page PE43711
UltraCMOS® RF Digital Step Attenuator
Figure 5 • Power De-rating Curve, 9 kHz–6 GHz, –40 to +105 °C Ambient, 50Ω
35
33
31
29
27
25
23
21
19
17
15
13
11
9
7
5
0.01
P0.1 dB Compression (≥ 48 MHz)
CW & Pulsed (< 48 MHz)
Pulsed (≥ 48 MHz)
CW (≥ 48 MHz)
0.05
0.50
5.00
50.00
500.00
5000.00
Frequency (MHz)
DOC-44414-2 – (3/2015)
www.psemi.com
Page 11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet PE43711.PDF ] |
Número de pieza | Descripción | Fabricantes |
PE43711 | RF Digital Step Attenuator | Peregrine Semiconductor |
PE43712 | RF Digital Step Attenuator | Peregrine Semiconductor |
PE43713 | RF Digital Step Attenuator | Peregrine Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |