|
|
Número de pieza | PE42723 | |
Descripción | SPDT RF Switch | |
Fabricantes | Peregrine Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PE42723 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
No Preview Available ! PE42723
Document Category: Product Specification
UltraCMOS® SPDT RF Switch, 5–1794 MHz
Features
• Supports DOCSIS 3.0/1 requirements
• Exceptional harmonics
▪ 2fo of –121 dBc @ 17 MHz
▪ 3fo of –140 dBc @ 17 MHz
• Best in class linearity across frequency band
• Low insertion loss and high isolation performance
▪ Insertion loss of 0.3 dB @ 1218 MHz
▪ Isolation of 54 dB @ 204 MHz
• High ESD performance of 3 kV HBM
• Packaging – 12-lead 3 × 3 × 0.75 mm QFN
Applications
• Broadband market (DOCSIS 3.0/1)
▪ Cable modem
▪ Set-top box
▪ Residential gateway
• Filter bank switching
• Relay replacement between DOCSIS 3.0 and
DOCSIS 3.1 configurations
Figure 1 • PE42723 Functional Diagram
RFC
RF1
CMOS Control Driver
V1
RF2
Product Description
The PE42723 is a HaRP™ technology-enhanced reflective SPDT RF switch designed for use in cable applica-
tions including DOCSIS 3.0/1 cable modem, set-top box and residential gateway. It delivers high linearity and
excellent harmonics performance in the 5–1794 MHz band. It also features low insertion loss and high isolation
performance making the PE42723 ideal for DOCSIS 3.1 applications.
The PE42723 is manufactured on Peregrine’s UltraCMOS® process, a patented variation of silicon-on-insulator
(SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of
conventional CMOS.
©2015–2016, Peregrine Semiconductor Corporation. All rights reserved. • Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121
Product Specification
www.psemi.com
DOC-64524-5 – (01/2016)
1 page PE42723
SPDT RF Switch
Switching Frequency
The PE42723 has a maximum 10 kHz switching
frequency. Switching frequency describes the time
duration between switching events. Switching time is
the time duration between the point the control signal
reached 50% of the final value and the point the
output signal reaches within 10% or 90% of its target
value.
Spurious Performance
The PE42723 spur fundamental occurs around 10
MHz. Its typical performance is –154 dBm/Hz (V1 = H)
and –165 dBm/Hz (V1 = L), with 100 kHz bandwidth.
Thermal Data
Psi-JT (JT), junction top-of-package, is a thermal
metric to estimate junction temperature of a device on
the customer application PCB (JEDEC JESD51-2).
JT = (TJ – TT)/P
where
JT = junction-to-top of package characterization
parameter, °C/W
TJ = die junction temperature, °C
TT = package temperature (top surface, in the
center), °C
P = power dissipated by device, Watts
Table 4 • Thermal Data for PE42723
Parameter
Typ Unit
Maximum junction temperature, TJMAX
90
(RF input power, CW = 80 dBmV, +85°C ambient)
°C
JT
21 °C/W
Control Logic
Table 5 provides the control logic truth table for the
PE42723.
Table 5 • Truth Table for PE42723
State
RFC–RF1
RFC–RF2
V1
H
L
DOC-64524-5 – (01/2016)
www.psemi.com
Page 5
5 Page PE42723
SPDT RF Switch
High Frequency Performance with External Matching
High frequency insertion loss and return loss can be improved by inductive matching on the RF ports in the
customer application board layout. Figure 12 is a matching network using a 2.2 nH inductor on each RF port.
The inductor needs to be placed as close to the device under test (DUT) as possible. Figure 13–Figure 15
show the insertion loss and return loss improvement using a 2.2 nH inductor on RFC port and a 2.2 nH on RF1,
RF2 and RFC ports, respectively.
Figure 12 • PE42723 Matching Network
DUT
RF1
L = 2.2 nH
SPDT
PE42723
L = 2.2 nH
RF2
L = 2.2 nH
RFC
Figure 13 • Insertion Loss (RFC–RFX) With or Without Matching(*)
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1
0
Note: * For reference only.
No Matching
RFC Matched Only
All RF Ports Matched
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
Frequency (GHz)
2
DOC-64524-5 – (01/2016)
www.psemi.com
Page 11
11 Page |
Páginas | Total 17 Páginas | |
PDF Descargar | [ Datasheet PE42723.PDF ] |
Número de pieza | Descripción | Fabricantes |
PE4272 | SPDT Broadband UltraCMOS | Peregrine Semiconductor |
PE42720 | SPDT RF Switch | Peregrine Semiconductor |
PE42721 | SPDT RF Switch | Peregrine Semiconductor |
PE42722 | SPDT RF Switch | Peregrine Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |