|
|
PDF PE423641 Data sheet ( Hoja de datos )
| Número de pieza | PE423641 | |
| Descripción | SP4T RF Switch | |
| Fabricantes | Peregrine Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PE423641 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Product Description
The PE423641 is a HaRP™ technology-enhanced
reflective SP4T RF switch. It has received AEC-Q100
Grade 2 certification and meets the quality and
performance standards that makes it suitable for use in
harsh automotive environments. It is designed to cover a
wide range of wireless applications from 50 MHz through
3 GHz such as cellular antenna band switching,
automotive infotainment and traffic safety applications.
No blocking capacitors are required if DC voltage is not
present on the RF ports.
The PE423641 is manufactured on Peregrine’s
UltraCMOS® process, a patented variation of silicon-on-
insulator (SOI) technology on a sapphire substrate,
offering excellent RF performance.
Peregrine’s HaRP™ technology enhancements deliver
high linearity and excellent harmonics performance. It is
an innovative feature of the UltraCMOS process, offering
the performance of GaAS with the economy and
integration of conventional CMOS.
Figure 1. Functional Diagram
Product Specification
PE423641
UltraCMOS® SP4T RF Switch
50–3000 MHz
Features
AEC-Q100 Grade 2 certified
Supports operating temperature up to
+105°C
HaRPTM technology enhancements
provide excellent linearity
Low harmonics of 2fo = –83 dBc
and 3fo = –77 dBc @ +35 dBm
IMD3 of –111 dBm @ WCDMA
band 1
IIP3 of 68 dBm
Low insertion loss
0.50 dB @ 1000 MHz
0.65 dB @ 2200 MHz
High isolation
32 dB @ 1000 MHz
25 dB @ 2200 MHz
High ESD performance
2 kV HBM on all pins
100V MM on all pins
1 kV CDM on all pins
Integrated decoder for 2-pin control
Accepts 1.8V and 2.75V levels
Figure 2. Package Type
16-lead 3 x 3 mm QFN
71-0094
Document No. DOC-12414-2 │ www.psemi.com
©2013-2014 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 11
1 page  
PE423641
Product Specification
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS
devices are immune to latch-up.
Moisture Sensitivity Level
The Moisture Sensitivity Level rating for the
PE423641 in the 16-lead 3x3 mm QFN package is
MSL1.
Table 5. Truth Table
Path
V2
RFC–RF1
RFC–RF2
RFC–RF3
RFC–RF4
0
1
0
1
V1
0
0
1
1
Switching Frequency
The PE423641 has a maximum 25 kHz switching
frequency.
Switching frequency describes the time duration
between switching events. Switching time is the
time duration between the point the control signal
reaches 50% of the final value and the point the
output signal reaches within 10% or 90% of its
target value. Switching time is provided in Table 1
and Table 1A.
Document No. DOC-12414-2 │ www.psemi.com
©2013-2014 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 11
5 Page 
PE423641
Product Specification
Figure 16. Tape and Reel Specifications
Tape Feed Direction
Pin 1
Top of
Device
Device Orientation in Tape
Table 6. Ordering Information
Order Code
PE423641MLAA-Z
EK423641-01
Description
PE423641 SP4T RF switch
PE423641 Evaluation kit
Package
Green 16-lead 3 x 3 mm QFN
Evaluation kit
Shipping Method
3000 units / T&R
1 / Box
Sales Contact and Information
For sales and contact information please visit www.psemi.com.
Advance Information: The product is in a formative or design stage. The datasheet contains design target
specifications for product development. Specifications and features may change in any manner without notice.
Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp. Peregrine products are protected under one or more of the
following U.S. Patents: http://patents.psemi.com.
Document No. DOC-12414-2 │ www.psemi.com
©2013-2014 Peregrine Semiconductor Corp. All rights reserved.
Page 11 of 11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet PE423641.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PE423641 | SP4T RF Switch | Peregrine Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |