|
|
Número de pieza | DF2B7M2CL | |
Descripción | ESD Protection Diodes | |
Fabricantes | Toshiba Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DF2B7M2CL (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! ESD Protection Diodes Silicon Epitaxial Planar
DF2B7M2CL
DF2B7M2CL
1. Applications
• ESD Protection
Note: This product is designed for protection against electrostatic discharge (ESD) and is not intended for any other
purpose, including, but not limited to, voltage regulation.
2. Packaging and Internal Circuit
1: Pin 1
2: Pin 2
CL2
3. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25)
Characteristics
Symbol
Note
Rating
Unit
Electrostatic discharge voltage (IEC61000-4-2)(Contact)
Electrostatic discharge voltage (IEC61000-4-2)(Air)
VESD
(Note 1)
±12
±15
kV
Peak pulse power (tp = 8/20 µs)
Peak pulse current (tp = 8/20 µs)
Junction temperature
Storage temperature
PPK
IPP (Note 2)
Tj
Tstg
40
2
150
-55 to 150
W
A
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: According to IEC61000-4-2.
Note 2: According to IEC61000-4-5.
©2015 Toshiba Corporation
1
Start of commercial production
2014-07
2015-08-19
Rev.2.0
1 page 8. Clamp Voltage VC - Peak Pulse Current (IPP) (Note)
DF2B7M2CL
Fig. 8.1 VC - IPP
Fig. 8.2 Based on IEC61000-4-5 8/20 µs pulse.
(Ed 2)
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
9. Insertion Loss (S21) (Note)
Fig. 9.1 S21 - f
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
©2015 Toshiba Corporation
5
2015-08-19
Rev.2.0
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet DF2B7M2CL.PDF ] |
Número de pieza | Descripción | Fabricantes |
DF2B7M2CL | ESD Protection Diodes | Toshiba Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |