DataSheet.es    

PDF 0805 Data sheet ( Hoja de datos )

Número de pieza 0805
Descripción Ultra Low Profile Common Mode Choke
Fabricantes Coilcraft 
Logotipo Coilcraft Logotipo



Total 2 Páginas
		
0805 Hoja de datos, Descripción, Manual
Document 1304-1
Ultra Low Profile Common Mode Choke 0805
• For noise suppression in super high speed signal lines: USB 3.x,
HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed
differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
• Up to 6.5 GHz differential mode 3 dB cutoff frequency; up to
35 dB common mode noise attenuation in GHz range
• Lowest profile 0805 common mode choke – 0.93 mm tall
Core material Ferrite
Environmental  RoHS compliant
Terminations  Matte tin over nickel over silver-platinum-glass frit.
Weight  9.0 – 13.0 mg
Ambient temperature  –40°C to +125°C with Irms current.
­Maximum part temperature 140°C
Storage temperature  Component: –40°C to +155°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel;  Plastic tape:  8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Common mode
impedance typ (Ohms)
10 MHz 100 MHz 500 MHz
Common mode DCR
attenuation typ (dB) Inductance2 max3 Isolation4 Irms5
10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA)
0805USBN-121MR_ 2
0805USBN-271MR_ 3
0805USBN-481MR_ 5
0805USBN-701MR_ 7
0805USBN-941MR_ 10
12 57
27 125
48 231
70 342
94 493
0.04 0.5 5.0
0.09 1.4 10.0
0.13 3.5 14.7
0.18 5.3 17.4
0.30 7.6 21.1
14
30
53
77
105
0.11 250 500
0.14 250 500
0.22 250 500
0.235 250 500
0.27 250 500
0805USBN-132MR_ 13 130 697
0805USBN-162MR_ 17 165 955
0805USBN-222MR_ 24 225 1310
0.50 10.0 24.4
0.78 12.1 27.3
1.14 14.0 30.0
140
182
252
0.32
0.37
0.63
250 500
250 450
250 350
1. When ordering, please specify packaging code:
0805USBN-222MRC
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plas-
tic tape (7500 parts per full reel).
2. Inductance measured at 100 MHz using an Agilent/HP 4286A
impedance analyzer and a Coilcraft SMD-A fixture.
3. DCR is specified per winding.
4. Winding to winding isolation (hipot) tested for one minute.
5. Current per winding that causes a 15°C rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.087
2,2
max
0.020 0.040
0,51 1,02
1
4
0.037
0,93
max
0.004
0,10
0.018
0,46
2
0.055
1,4
max
3
Dimensions
are
in
inches
mm
12
43
0.030 0.036
0,76 0,91
2
0.014
1 0,36
34
Recommended
Land Pattern
0.020
0,51
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1304-1  Revised 05/11/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

1 page


PáginasTotal 2 Páginas
PDF Descargar[ Datasheet 0805.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
08003GOASilicon Controlled RectifierMicrosemi Corporation
Microsemi Corporation
08003GOASilicon Controlled RectifierMicrosemi Corporation
Microsemi Corporation
08003GOBSilicon Controlled RectifierMicrosemi Corporation
Microsemi Corporation
08003GOBSilicon Controlled RectifierMicrosemi Corporation
Microsemi Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar