|
|
PDF CGS74LCT2524M Data sheet ( Hoja de datos )
| Número de pieza | CGS74LCT2524M | |
| Descripción | 1 to 4 Minimum Skew (300 ps) 3V Clock Driver | |
| Fabricantes | National Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CGS74LCT2524M (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
January 2000
CGS74LCT2524
1 to 4 Minimum Skew (300 ps) 3V Clock Driver
General Description
This minimum skew clock driver is a 3V option of the current
CGS74CT2524 Minimum Skew Clock Driver and is designed
for Clock Generation and Support (CGS) applications oper-
ating at low voltage, high frequencies. This device guaran-
tees minimum output skew across the outputs of a given de-
vice.
Skew parameters are also provided as a means to measure
duty cycle requirements as those found in high speed clock-
ing systems. This minimum skew clock driver with one input
driving four outputs, is specifically designed for signal gen-
eration and clock distribution applications.
Features
n Ideal for low power/low noise high speed applications
n Guaranteed:
— 300 ps pin-to-pin skew (tOSHL and tOSLH)
n Implemented on National’s FACT™ family process
n 1 input to 4 outputs low skew clock distribution
n Symmetric output current drive: 12 mA IOH/IOL
n Industrial temperature of −40˚C to +85˚C
n 8-pin SOIC package
n Low dynamic power consumption above 20 MHz
n Guaranteed 2 kV ESD protection
Logic Symbol
Connection Diagrams
Pin Assignment
SOIC (MO)
DS011956-1
The output pins act as a single entity and will follow the state of the CLK
when the clock distribution chip is selected.
Pin Description
Pin Names
CLK
O0–O3
Description
Clock Input
Outputs
Truth Table
Inputs
CLK
L
H
L = Low Logic Level
H = High Logic Level
Outputs
O0–O3
L
H
DS011956-2
DS011956-3
See NS Package Number M08A
FACT™ is a trademark of National Semiconductor Corporation.
© 2000 National Semiconductor Corporation DS011956
www.national.com
1 page  
Physical Dimensions inches (millimeters) unless otherwise noted
8-Lead (0.150" Wide) Molded Small Outline Package, JEDEC
Order Number CGS74LCT2524M
NS Package Number M08A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CGS74LCT2524M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CGS74LCT2524 | 1 to 4 Minimum Skew (300 ps) 3V Clock Driver | National Semiconductor |
| CGS74LCT2524 | CGS74LCT2524 1 to 4 Minimum Skew (300 ps) 3V Clock Driver (Rev. D) |  Texas Instruments |
| CGS74LCT2524M | 1 to 4 Minimum Skew (300 ps) 3V Clock Driver | National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |