DataSheet.es    


PDF KM10 Data sheet ( Hoja de datos )

Número de pieza KM10
Descripción Force Sensor
Fabricantes ME-Mebsysteme 
Logotipo ME-Mebsysteme Logotipo



Hay una vista previa y un enlace de descarga de KM10 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! KM10 Hoja de datos, Descripción, Manual

Force Sensor KM10
Nominal force ranges: 25N, 50N, 100N, 500N, 1000N
The KM10 is a membrane force sensor in ultra miniature design.
The force is transmitted via the universal ball joint (diameter 2.4mm, R4) in the centre of
the sensor.
The force sensor is assembled on a flat surface. The force sensor is centered on the outer
circumference, for example with 3 pins or within a 0.5 mm deep sink. The 9.8mm – 7.4mm
ring forms the sensor’s contact area. In the centre, a potting compound is visible up to a
7.4mm diameter. The inner ring is not used for centring.
To protect against lift-off, the contact area can be fixed on a flat surface with PUR lacquer.
Due to its small dimensions, a Teflon cable with an outer diameter of just 1.4mm is used.
Processing the AWG36 stranded wires requires a special tool (scalpel, Hoffmann stripper-
AWG36-26). The Teflon coating is intended exclusively for fixed installation, not for mobile
use.
A version with a central cable outlet is available as an alternative to a lateral cable outlet.
Cable type in this version is STC-31v-4RWBG, PVC, Diameter 2,2mm;
collateral cabel outlet
central cabel outlet
ME-Meßsysteme GmbH, Neuendorfstr. 18a, DE-16761 Hennigsdorf
Tel +49 (0)3302 78620 60, Fax +49 (0)3302 78620 69, [email protected], www.me-systeme.de
1

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet KM10.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
KM10Force SensorME-Mebsysteme
ME-Mebsysteme
KM110216 interpolation LSIKODENSHI
KODENSHI
KM110BMagnetic field sensorNXP Semiconductors
NXP Semiconductors
KM110BH30 and 70 angle sensor hybridsNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar