|
|
Datasheet ELC4H Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | ELC4H-1 | Grid Control Rectifier Tube |  ETC | rectifier |
| 2 | ELC4H-2 | Grid Control Rectifier Tube | ETC | rectifier |
| 3 | ELC4H-3 | Grid Control Rectifier Tube | ETC | rectifier |
| 4 | ELC4H-4 | Grid Control Rectifier Tube | ETC | rectifier |
| 5 | ELC4H-5 | Grid Control Rectifier Tube | ETC | rectifier |
ELC Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | ELC-10JT | THERMOCOUPLE TRANSMITTER
Enlaircon Pty Ltd
“Technology to Support the Spirit”
ELC-10JT
Specifications subject to change without notice
1
Enlaircon Pty Ltd
Website: www.enlaircon.com.au Email: [email protected] Phone: (612) 9909 0353 Facsimile: (612) 9909 0823 Postal Address: PO Box 697 Spit  Enlaircon data | | |
| 2 | ELC-10PR | HIGH-DENSITY SIGNAL CONDITIONERS 10-PACK PULSE SCALER
Enlaircon Pty Ltd
“Technology to Support the Spirit”
ELC-10PR
Specifications subject to change without notice
1
Enlaircon Pty Ltd
Website: www.enlaircon.com.au Email: [email protected] Phone: (612) 9909 0353 Facsimile: (612) 9909 0823 Postal Address: PO Box 697 Spit Enlaircon data | | |
| 3 | ELC-410-37 | LED - Chip LED - Chip
Preliminary Radiation Violet Type Standard 10.04.2007 Technology InGaN/Al2O3
ELС-410-37
rev. 02/07 Electrodes Both on top side
380 µm
typ. dimensions in µm (±20 µm)
Ø 90µm 380 µm 350 µm 100 µm
P
typ. thickness 90 (±20) µm cathode gold alloy, 1.5 µm a  EPIGAP optoelectronic GmbH data | | |
| 4 | ELC-420-21 | LED - Chip LED - Chip
10.04.2008 Radiation Violet Type Special Technology InGaN
ELС-420-21
rev. 01 Electrodes N (cathode) up
typ. dimensions (±50) µm
typ. thickness 145 (±15) µm cathode gold alloy, 2.5 µm anode gold alloy, 1.5 µm
Absolute Maximum Ratings
at Tamb = 25° C, unless EPIGAP optoelectronic GmbH data | | |
| 5 | ELC-460-31-2 | LED - Chip LED - Chip
26.05.2008 Radiation Blue Type Technology InGaN/Al2O3
ELС-460-31-2
rev. 02 Electrodes Both on top side
typ. dimensions (µm)
typ. thickness 100 (±10) µm p and n contact gold alloy backside metalization gold alloy
Optical and Electrical Characteristics
Tamb = 25� EPIGAP optoelectronic GmbH data | | |
| 6 | ELC-460-34 | LED - Chip Preliminary
LED - Chip
Radiation Blue Type Standard
10.04.2007 Technology InGaN/Al2O3
rev. 01/07 Electrodes Both on top side
ELС-460-34
300 Ø 80
typ. dimensions in µm (±20 µm)
typ. thickness 90 (±20) µm
P
300
front side metalization Au-alloy, 0.5 µm backside meta EPIGAP optoelectronic GmbH data | | |
| 7 | ELC-470-31-1 | LED - Chip LED - Chip
Preliminary Radiation Blue Type Standard 10.04.2007 Technology InGaN/Al2O3
ELС-470-31-1
rev. 02/07
Electrodes Both on top side
1000
typ. dimensions (±25) µm
P
typ. thickness 90 (±10) µm contact metalization gold alloy, 1.5 µm backside metalization
N
N P
EPIGAP optoelectronic GmbH data | |
| Esta página es del resultado de búsqueda del ELC4H. Si pulsa el resultado de búsqueda de ELC4H se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |