DataSheet.es    


PDF VS-2KBB80 Data sheet ( Hoja de datos )

Número de pieza VS-2KBB80
Descripción Single Phase Rectifier Bridge
Fabricantes Vishay 
Logotipo Vishay Logotipo



Hay una vista previa y un enlace de descarga de VS-2KBB80 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! VS-2KBB80 Hoja de datos, Descripción, Manual

www.vishay.com
VS-2KBB Series
Vishay Semiconductors
Single Phase Rectifier Bridge, 1.9 A
2KBB
PRODUCT SUMMARY
IO
VRRM
Package
Circuit
1.9 A
50 V to 1000 V
2KBB
Single phase bridge
FEATURES
• Suitable for printed circuit board mounting
• Leads on standard 2.54 mm (0.1") grid
• Compact construction
• High surge current capability
• Polarized package
• Equivalent to standard DIN parts
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
A 1.9 A single phase diode bridge rectifier assembly
consisting of four silicon diodes in a plastic encapsulation,
intended for general applications in industrial and consumer
equipment.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IO
IFSM
I2t
VRRM
TJ
TC
50 Hz
60 Hz
50 Hz
60 Hz
VALUES
1.9
45
50
52
17.7
16.1
100 to 1000
-40 to 150
UNITS
A
°C
A
A2s
V
°C
ELECTRIACL SPECIFICATIONS
VOLTAGE RATINGS AND APPLICATION DATA
CROSS REFERENCE
PART
NUMBER
DIN CODE
VRRM, VRSM
MAXIMUM PEAK
REVERSE VOLTAGE
TJ = 15 °C
(V)
IRM
TYPICAL PEAK REVERSE
CURRENT PER DIODE
AT RATED VRRM
(μA)
TJ = 25 °C TJ = 150 °C
VS-2KBB05 B20C1500
50
10 500
APPLICATION DATA (SEE FIGURE 3)
VRMS MAXIMUM
RECOMMENDE
D AC SUPPLY
VOLTAGE
(V)
CMAX
MAXIMUM
LOAD
CAPACITANCE
(μF)
RMIN
MINIMUM
SOURCE
RESISTANCE
(Ω)
20
7000
0.3
VS-2KBB10 B40C1500
100
10 500
40
5000
0.5
VS-2KBB20 B80C1500
200
10 500
80
3300
0.8
VS-2KBB40 B125C1500
400
10 500
125
1600
1.5
VS-2KBB60 B250C1500
600
10 500
250
1200
2.5
VS-2KBB80 B380C1500
800
10 500
380
800 3.0
VS-2KBB100 B500C1500
1000
10 500
500
600 5.0
Note
• For PIN configuration - ~ ~ + add “R” to end of part number, e.g. 2KBB05R (see also dimensions for details - link at the end of datasheet)
Revision: 26-Aug-14
1 Document Number: 93561
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 page




VS-2KBB80 pdf
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet VS-2KBB80.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VS-2KBB80Single Phase Rectifier BridgeVishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar