|
|
PDF XFL4020-332ME Data sheet ( Hoja de datos )
| Número de pieza | XFL4020-332ME | |
| Descripción | Shielded Power Inductors | |
| Fabricantes | Coilcraft | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XFL4020-332ME (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Document 745-1
Shielded Power Inductors –XFL4020www.DataSheet4U.com
• Exceptionally low DCR – 10.8 mOhm
• Excellent current handling capability
Designer’s Kit C436 contains 5 each of all values
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 162 – 169 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current.
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 1000/7″reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part number1
XFL4020-102ME_
XFL4020-152ME_
XFL4020-222ME_
XFL4020-332ME_
XFL4020-472ME_
Inductance2
±20% (µH)
1.0
1.5
2.2
3.3
4.7
DCR (mOhms)
typ3
max3
10.80
14.40
21.35
34.80
52.20
11.90
15.80
23.50
38.30
57.40
SRF typ4
(MHz)
64
59
38
33
26
10% drop
4.5
4.1
3.1
2.7
2.0
Isat (A)5
20% drop
5.1
4.4
3.5
2.8
2.5
30% drop
5.4
4.6
3.7
2.9
2.7
Irms (A)6
20°C rise 40°C rise
8.0 11.0
6.7 9.1
6.0 8.0
3.9 5.2
3.6 5.0
1. When ordering, please specify packaging code:
XFL4020-472MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.157 ±0.012
4,0 ±0,3
Dash
number
0.157 ±0.012
4,0 ±0,3
0.033
0,85
0.083
2,10
max
Recommended
Land Pattern
0.154
3,90
Irms Testing
Irms testing was performed on 0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and proximity to other components.
Therefore temperature rise should be verified in application
conditions.
0.063
1,6
Dimensions are in
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
0.126
3,2
0.145
3,7
0.039
1,0
Document 745-1 Revised 01/19/10
© Coilcraft, Inc. 2010
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet XFL4020-332ME.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XFL4020-332ME | Shielded Power Inductors | Coilcraft |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |