![]() |
|
Número de pieza | P6SMB62CA | |
Descripción | TVS Diode, SMD (Transient Voltage Suppressor) | |
Fabricantes | Pan Jit International | |
Logotipo | ![]() |
|
Hay una vista previa y un enlace de descarga de P6SMB62CA (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available !
P6SMB SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600Watts
BREAK DOWN VOLTAGE
6.8 to 400 Volt
FEATURES
• For surface mounted applications in order to optimize board space.
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory
Fammability Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• Lead free in compliance with EU RoHS 2011/65/EU directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
0.185(4.70)
0.160(4.06)
0.012(0.305)
0.006(0.152)
MECHANICAL DATA
• Case:JEDEC DO-214AA ,Molded plastic over passivated junction
• Terminals: Solder plated,solderable per MIL-STD-750,Method 2026
• Polarity : Color band denotes cathode end
• Standard Packaging:12mm tape (EIA-481)
• Weight: 0.003 ounce, 0.093 gram
0.050(1.27)
0.030(0.76)
0.220(5.59)
0.200(5.08)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Ele ctrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
Rating
Peak Pulse Power Dissipation on 10/1000s waveform (Notes 1,2, Fig.1)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) (Notes 2,3)
Peak Pulse Current on 10/1000s waveform (Notes 1) Fig.3
Typical Thermal Resistance Junction to Air (Notes 2)
Operating Junction and Storage Temperature Range
Symbol
PPP
IFSM
IPPM
RJA
TJ,TSTG
Value
600
100
see Table 1
60
-55 to +150
Units
Watts
Amps
Amps
OC / W
OC
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig. 2.
2. Mounted on 5mm2 (0.13mm thick) land areas.
3. Measured on 8.3ms, single hal f sine-wave or equivalent s quare wave, duty cycle = 4 pulse s per minute maximum.
4. A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than
the DC or continuous peak operating voltage level.
December 2,2013-REV.08
PAGE . 1
1 page ![]() ![]() P6SMB SERIES
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5K per 7" plastic Reel
December 2,2013-REV.08
PAGE . 5
5 Page ![]() |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet P6SMB62CA.PDF ] |
Número de pieza | Descripción | Fabricantes |
P6SMB62C | TVS Diode, SMD (Transient Voltage Suppressor) | ![]() Pan Jit International |
P6SMB62CA | BI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 600 WATTS/ 6.8 THRU 200 VOLTS | ![]() Central Semiconductor Corp |
P6SMB62CA | Glass Passivated Junction Transient Voltage Suppressor | ![]() Luguang Electronic |
P6SMB62CA | 600W Surface Mount Transient Voltage Suppressors | ![]() Weitron Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
![]() Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
![]() Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |