DataSheet.es    


PDF 1N4002GP Data sheet ( Hoja de datos )

Número de pieza 1N4002GP
Descripción Glass Passivated Junction Rectifier
Fabricantes Vishay 
Logotipo Vishay Logotipo



Hay una vista previa y un enlace de descarga de 1N4002GP (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! 1N4002GP Hoja de datos, Descripción, Manual

1N4001GP thru 1N4007GP
Vishay General Semiconductor
Glass Passivated Junction Rectifier
SUPERECTIFIER®
DO-204AL (DO-41)
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V to 1000 V
IFSM (8.3 ms sine-wave)
30 A
IFSM (square wave tp = 1 ms)
45 A
IR 5.0 μA
VF 1.1 V
TJ max.
175 °C
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for both
consumer and automotive applications.
FEATURES
• Superectifier structure for high reliability
application
• Cavity-free glass-passivated junction
• Low forward voltage drop
• Low leakage current, typical IR less than 0.1 μA
• High forward surge capability
• Meets environmental standard MIL-S-19500
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
MECHANICAL DATA
Case: DO-204AL, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT
Maximum repetitive peak
reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified
current 0.375" (9.5 mm) lead length
at TA = 75 °C
Non-repetitive peak
forward surge current
square waveform
TA = 25 °C (fig. 3)
tp = 1 ms
tp = 2 ms
tp = 5 ms
Maximum full load reverse current,
full cycle average 0.375" (9.5 mm)
lead length TA = 75 °C
Rating for fusing (t < 8.3 ms)
VRMS (1)
VDC (1)
IF(AV) (1)
IFSM (1)
IR(AV) (1)
I2t (2)
35
50
70 140 280 420 560 700 V
100
200
400
600
800
1000
V
1.0 A
45
35 A
30
30 μA
3.7 A2s
Operating junction and
storage temperature range
TJ, TSTG (1)
- 65 to + 175
°C
Notes
(1) JEDEC registered values
(2) For device using on bridge rectifier application
Document Number: 88504 For technical questions within your region, please contact one of the following:
Revision: 15-Mar-11
www.vishay.com
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 page




1N4002GP pdf
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet 1N4002GP.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
1N4002G(1N4001G - 1N4007G) GLASS PASSIVATED JUNCTION PLASTIC RECTIFIERRectron Semiconductor
Rectron Semiconductor
1N4002G(1N4001G - 1N4007G) Rectifiers(Rugged glass package / using a high temperature alloyed construction)NXP Semiconductors
NXP Semiconductors
1N4002G(1N4001G - 1N4007G) GLASS PASSIVATED JUNCTION RECTIFIERShanghai Sunrise Electronics
Shanghai Sunrise Electronics
1N4002G(1N4001G - 1N4007G) GLASS PASSIVATED JUNCTION PLASTIC RECTIFIERShanghai Lunsure Electronic
Shanghai Lunsure Electronic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar