DataSheet.es    


PDF LA1787M Data sheet ( Hoja de datos )

Número de pieza LA1787M
Descripción Single-Chip Tuner IC for Car Radios
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de LA1787M (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! LA1787M Hoja de datos, Descripción, Manual

Ordering number : ENN6655
Monolithic Linear IC
LA1787M
Single-Chip Tuner IC for Car Radios
Overview
The LA1787M integrates all six blocks required in a car
radio tuner on a single chip.
Functions
• FM front end
• FM IF
• Noise canceller
• Multiplex
• AM up-conversion
• FM/AM switch
• MRC
Features
• Improved noise reduction methods
— The FM front end provides excellent 3-signal
characteristics equivalent to those of the LA1193M.
— Superlative listenability due to improved medium and
weak field noise canceller characteristics.
— Improved separation characteristics
— Anti-birdie filter
— Improved AM and FM thermal characteristics
Mounted on a 40 × 80 × 1.3 mm3
glass epoxy printed circuit board
Independent IC
— Excellent FM signal meter linearity
— Modified N.C. circuit for improved noise rejection
• Improved AM adjacent channel interference
characteristics (40 kHz)
• Double conversion AM tuner (up conversion)
Reduces the number of external components required as
compared to earlier double conversion tuners, in
particular, no crystal is required (when used in
conjunction with the LC72144).
• Sample-to-sample variation reduction circuit built into
the FM IF circuit.
(Fixed resistors are used for the SD, keyed AGC, mute
on adjustment, ATT, SNC, and HCC functions.)
• Improved FM separation temperature characteristics
• The LA1787 inherits the block arrangement of the
LA1780M and supports pin-compatible designs.
Package Dimensions
Unit:mm
3159A-QIP64E (14 × 14)
[LA1787M]
17.2
14.0
48 33
49 32
64
1
(1.0)
0.8
17
16
0.35
0.15
Ambient temperature, Ta — °C
SANYO: QIP64E (14 × 14)
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
72602RM (OT) No. 6655-1/54

1 page




LA1787M pdf
LA1787M
Operating Characteristics and Symbols Used in the Test Circuit Diagrams
Switches (SW)
Switch on = 1, SW off = 0
There are two switches that use signal transfer.
— SW2: switches between the mixer input and the IF input.
— SW4: switches between noise canceler input and IF output + noise canceler input.
Types of SG used
PG1 (AC1)
AC2
AC3
AC4
AC5
Used for noise canceler testing. A pulse generator and an AF oscillator are required.
Used for FM front end testing. Outputs an 83 MHz signal.
Used for FM IF, noise canceler, and MPX testing. Outputs a 10.7 MHz signal. Stereo modulation must be possible.
Used for AM testing. Outputs 1 MHz and 1.4 MHz signals.
Used with the MRC. Can also be used for AF and OSC.
Power supply
VCC
VCC1
VCC2
VCC3
8V
5V
0.1 V / 0.7 V / 2 V / 4 V
0.1 V / 0.6 V / 2 V
• Switches
These levels
must be variable.
SD, stereo, seek/stop
Keyed AGC, Mute ATT
HCC, SNC, SASC (MRC)
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
SW10
Parameter
ON OFF
AM/FM switching. The FE VCC is supplied to pin 62.
FM IF switching. Pin 51/FE output
FM
FE IF OUT (A)
AM
AC3 (B)
For conversion gain testing
Conversion gain measurement (A)
Other/purposes
For switching between noise canceler input and IF output + noise canceler.
AC1 (A)
Other/purposes
High-speed SD
High-speed SD
Other/purposes
SEEK/STOP (IF BUFF ON/OFF)
STOP
Seek (IF buffer output)
MUTE ATT 200 k
MUTE 200 k
OFF
MUTE ATT 30 k
MUTE 30 k
OFF
For pilot cancellation testing
When pilot cancellation is used When pilot cancellation is not used
Mute off (pin 33)
MUTE OFF
MUTE ON
• Trimmers (variable resistors)
VR1
VR2
Separation adjustment
Pilot cancellation adjustment
Test Points
• DC voltages
VD1
VD2
VD3
VD4
VD5
VD6
VD7
FM RF AGC voltage
AM/FM SD, AM Tweet, FM stereo indicator
AM/FM S-meter
MRC output
Mute drive output
AM antenna damping voltage
N.C. Gate time
Pin 2
Pin 26
Pin 24
Pin 27
Pin 33
Pin 46
Pin 8
• AC voltages
VA1 AM/FM OSC Buff Pin 4
VA2
First IF output
Pin 53 CF pin 51 load level (10.7 MHz)
VA3
IF counter buffer
Pin 23 (10.7 MHz/450 kHz)
VA4 MPX OUT Left ch Pin 15 (AF)
VA5 MPX OUT Right ch Pin 16 (AF)
No. 6655-5/54

5 Page





LA1787M arduino
Continued from preceding page.
Pin No.
Function
LA1787M
Description
27 MRC control voltage time
constant
The MRC detector time constant
is determined by a 100 resistor
and C2 when discharging and by
the 2-µA current and C2 when
charging.
Equivalent circuit
VCC
2µA
VCC
C2
27
100
Pin 28
28 SNC control input
The sub-output is controlled by a
0 to 1-V input.
29 HCC control input
The high band frequency output is
controlled by a 0 to 1-V input.
It can also be controlled by the
MRC output.
Use a resistor of at least 100 k
when controlling with the pin 32
FM S-meter signal.
VREF
A13571
28
A13572
VREF
32
29
+
1µF
A13573
Continued on next page.
No. 6655-11/54

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet LA1787M.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LA1787MSingle-Chip Tuner IC for Car RadiosSanyo Semicon Device
Sanyo Semicon Device
LA1787MSingle-Chip Tuner ICON Semiconductor
ON Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar