DataSheet.es    


PDF 114 Data sheet ( Hoja de datos )

Número de pieza 114
Descripción ESTABLISHED RELIABILITY RELAYS
Fabricantes TELEDYNE 
Logotipo TELEDYNE Logotipo



Hay una vista previa y un enlace de descarga de 114 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! 114 Hoja de datos, Descripción, Manual

CENTIGRID®
ESTABLISHED RELIABILITY
RELAYS
DPDT
SERIES
114
SERIES
DESIGNATION
114
114D
114DD
RELAY TYPE
DPDT basic relay
DPDT relay with internal diode for coil transient suppression
DPDT relay with internal diodes for coil transient suppression and polarity
reversal protection
INTERNAL CONSTRUCTION
UPPER
STATIONARY
CONTACT
UNI-FRAME
ARMATURE
DESCRIPTION
The Series 114 Centigrid® relay is an ultraminiature, hermetically sealed,
armature relay. Its low profile height (.275") and .100" grid spaced terminals,
which precludes the need for spreader pads, make it ideal for applications
where extreme packaging density and/or close PC board spacing are required.
The basic design and internal construction are similar to the standard
Teledyne DPDT TO-5 relay (e.g., Series 412). The following unique
construction features and manufacturing techniques provide overall high
reliability and excellent resistance to environmental extremes:
LOWER
STATIONARY
CONTACT
MOVING
CONTACT
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Temperature
(Ambient)
–65°C to +125°C
Vibration
(General Note 1)
30 g’s to 3000 Hz
Shock
(General Note 1)
75 g’s,
6 msec, half-sine
Acceleration
50 g’s
Enclosure
Hermetically sealed
Weight
0.09 oz. (2.55g) max.
• All welded construction.
• Unique uni-frame design providing high magnetic efficiency and mechanical
rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of internal
cleanliness.
• Precious metal alloy contact material with gold plating assures excellent
high current and dry circuit switching capabilities.
The Series 114D and 114DD relays have internal discrete silicon diodes for
coil suppression and polarity reversal protection.
By virtue of its inherently low intercontact capacitance and contact circuit
losses, the 114 relay has proven to be an excellent ultraminiature RF switch
for frequency ranges well into the UHF spectrum. A typical RF application for
the 114 relay is in handheld radio transceivers, wherein the combined features
of good RF performance, small size, low coil power dissipation and high
reliability make it a preferred method of Transmit-Receive
switching (see Figure 1).
©2006 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
114 Page 1
114/0706/Q1

1 page




114 pdf
Appendix A: Spreader Pads
Pad designation and
bottom view dimensions
Height
For use with the following:
Dim. H
Max.
.370 [9.4]
MAX SQ
.300
[7.62]
.150
[3.81]
.200
[5.08]
.100
[2.54]
.100
[2.54]
“M” Pad 5/ 6/
Dim H
MAX
.370
[9.4]
MIN
ER411T, J411T, ER412, ER412D
ER412DD, J412, J412D, J412DD
ER412T, J412T
712, 712D, 712TN
.014 ER431T, J431T, ER432, ER432D
[0.36]
(REF)
ER432DD, J432, J432D, J432DD
ER432T, J432T
732, 732D, 732TN
ER420, J420, ER420D, J420D
ER420DD, J420DD, ER421, J421
ER421D, J421D, ER421DD
J422D, ER422DD, J422DD, 722
.388 (9.86)
.393 (9.99)
.493 (12.52)
.503 (12.78)
.398 (10.11)
.390 [9.91]
SQ
.100
[2.54]
.300
[7.62]
.100
[2.54]
.150
[3.81]
Dim H
MAX
ER411T
ER412, ER412D, ER412DD
J412, J412D, J412DD
712, 712D
ER421, ER421D, ER421DD
722, 732D
.441 (11.20)
.451 (11.46)
.451 (11.46)
.300
[7.62]
“M2” Pad 7/ 8/
.150
[3.81]
.130
[3.3]
ER431T
ER432, ER432D, ER432DD
732, 732D
.546 (13.87)
.556 (14.12)
.370 [9.4]
MAX SQ
.300
[7.62]
.150
[3.81]
.200
[5.08]
.100
[2.54]
.100
[2.54]
Dim H
MAX
.370
[9.4]
MIN
ER411, ER411D, ER411DD
ER411TX
ER412X, ER412DX, ER412DDX
ER412TX
712X, 712DX, 712TNX
ER420X, ER420DX, ER420DDX
.014
[0.36] ER421X, ER421DX, ER421DDX
(REF)
ER422X, ER422DX
ER422DDX, 722X, 722DDX
ER431, ER431D, ER431DD
ER431TX
ER432X, ER432DX, ER432DDX
ER432TX
.388 (9.86)
.393 (9.99)
.398 (10.11)
.493 (12.52)
“M3” Pad 5/ 6/ 9/
732X, 732DX, 732TNX
.503 (12.78)
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise speci¿ed, tolerance is ± .010” (0.25).
5/. Add 25 mȍ to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 mȍ to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
(800) 284-7007 • www.teledynerelays.com
Ƈ +44 (0) 1236 453124 • www.teledyne-europe.com
© 2008 Teledyne Relays

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet 114.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
11-21UYC-S530-XX-TR811-21UYC/S530-XX/TR8 1206 Package Chip LEDsEverlight
Everlight
11-MD124Bi-Directional Motor DriverSiTi
SiTi
11-MPC-001-2-BPower Line Filtersapi
api
11-MPC-001-5-APower Line Filtersapi
api

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar